Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Black Diamond Drill Sharpener manual sought
I have recently purchased a Black Diamond Drill sharpener, with no
manual. I am happy to reimurse costs of copying and postage if you can help me out. The plate on the machine reads: BLACK DIAMOND Machine# 10422 Size 7 1/4HP 3440RPM 110 Volts PH 1 60~ Ser # 1267737 Any help is greatly appreciated. The machine is complete with 96 collets. I paid $850. How'd I do? |
#2
|
|||
|
|||
Try this guy:
http://home.att.net/~btuttleman/barrysite.html Search for Black Diamond. He has two listed but I don't know if either is yours. I've dealt with him in the past and was happy with his service. Best Regards, Keith Marshall "I'm not grown up enough to be so old!" "Spencer" wrote in message oups.com... I have recently purchased a Black Diamond Drill sharpener, with no manual. I am happy to reimurse costs of copying and postage if you can help me out. The plate on the machine reads: BLACK DIAMOND Machine# 10422 Size 7 1/4HP 3440RPM 110 Volts PH 1 60~ Ser # 1267737 Any help is greatly appreciated. The machine is complete with 96 collets. I paid $850. How'd I do? |
#3
|
|||
|
|||
I just bought a model 21, mine is #size 54 to 1/2 drills it also came with
about 100 collets. There is a company that sells parts for these. http://www.rushmachinery.com/ they sell the collet/bushings as they call them $15.00 each. Mine does a GREAT job bits are like new when done. If you do find a manual let me know. I will talk to the person i bought it from he may have information, I know he had a few photo copies of some information. When I bought it he/we worked out a deal and I also came home with a "Lisle" drill grinder that does drills up to 1-1/2. The Lisle is not real good for the smaller drills, i did sharpen some larger bits with the Lisle and it did a very good job. I have a Darex that I will now most likely sell, why I now have 3 drill grinders is just my illness with tools. The black diamond machines are ver good, I hope you get good use out of it. "Spencer" wrote in message oups.com... I have recently purchased a Black Diamond Drill sharpener, with no manual. I am happy to reimurse costs of copying and postage if you can help me out. The plate on the machine reads: BLACK DIAMOND Machine# 10422 Size 7 1/4HP 3440RPM 110 Volts PH 1 60~ Ser # 1267737 Any help is greatly appreciated. The machine is complete with 96 collets. I paid $850. How'd I do? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Origin of Hex Head Nuts/bolts? | Metalworking | |||
Metal Working Machinery New and Used in Australia and for Export | Metalworking | |||
Tool sharpening in general | Metalworking | |||
Core drills | UK diy | |||
Mill drill, or drill mill? | Metalworking |