Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Way off subject
Sorry to bring this up but this group has always been the place to go for
info on almost anything.Here goes. I have a 1995 Chev. Monte Carlo that is in great shape (no rust) except for the drivers side rear fender. Had extensive rust around the filler tube shop that did repair said problem was defective insulation behind fender had it fixed . Now I find the same thing happening along the edge of the fender about 8 inches from original repair. Could this be GM recall? Frank |
#2
|
|||
|
|||
"ktech" wrote in message ... Sorry to bring this up but this group has always been the place to go for info on almost anything.Here goes. I have a 1995 Chev. Monte Carlo that is in great shape (no rust) except for the drivers side rear fender. Had extensive rust around the filler tube shop that did repair said problem was defective insulation behind fender had it fixed . Now I find the same thing happening along the edge of the fender about 8 inches from original repair. Could this be GM recall? Frank Doubt it, Rust through is only warranted for 7 years IIRC. There is a web page for all recalls if you do some searching. |
#3
|
|||
|
|||
A 10.5 yr old car, wake up.
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Choosing a HOT WATER RECIRCULATOR for QUICK HOT WATER DELIVERY or for HOT WATER ON D'MAND is now a whole lot easier. | Home Repair | |||
Great Links | UK diy | |||
OT Guns more Guns | Metalworking | |||
Subject: Cutting 4" off a formica worksurface | Woodworking | |||
Zienth Vertical Squish (How do I find and test the Capacitor?) | Electronics Repair |