Our painter sprayed a primer for latex paint onto our new
smoothly-textured drywall.

After a few days, he sprayed on two (2) coats of a low-sheen latex
enamel.

After drying, the ceilings and walls have a number of areas that are
lower/higher sheen than the rest, as seen by looking along the walls,
ceilings.

Is this the inevitable downside of sheen enamel on drywall or could it
be the painter/paint, etc. The painter claims a 3rd coat will fix
everything.

Possibly the sheen contrast will reduce to zero over time, but I'm not
optimistic.

Not sure what the primer was, but the enamel is Frazee Mirro-Glide.

Any suggestions? Thanks.

In article .com, wrote:
Our painter sprayed a primer for latex paint onto our new
smoothly-textured drywall.

After a few days, he sprayed on two (2) coats of a low-sheen latex
enamel.

After drying, the ceilings and walls have a number of areas that are
lower/higher sheen than the rest, as seen by looking along the walls,
ceilings.

Do those areas correspond to where seams in the drywall were taped and mudded?
If so - if the sheen on the drywall is different from the sheen on the mud -
the cause is probably cheap primer, or not enough primer, or both. Since it
was sprayed, it was probably thinned first to facilitate spraying, and
probably should have had two prime coats instead of one.

Is this the inevitable downside of sheen enamel on drywall or could it
be the painter/paint, etc. The painter claims a 3rd coat will fix
everything.

Probably will.

Possibly the sheen contrast will reduce to zero over time, but I'm not
optimistic.

Doubtful.

Not sure what the primer was, but the enamel is Frazee Mirro-Glide.

Any suggestions? Thanks.

Find out what primer he used....

--
Regards,
Doug Miller (alphageek at milmac dot com)

Nobody ever left footprints in the sands of time by sitting on his butt.
And who wants to leave buttprints in the sands of time?

wrote:
Our painter sprayed a primer for latex paint onto our new
smoothly-textured drywall.

After a few days, he sprayed on two (2) coats of a low-sheen latex
enamel.

After drying, the ceilings and walls have a number of areas that are
lower/higher sheen than the rest, as seen by looking along the walls,
ceilings.

Is this the inevitable downside of sheen enamel on drywall or could it
be the painter/paint, etc.

It is because of uneven absorption (needed more/better primer), uneven
application of either/both primer and top coat or not stirring the top
coat paint sufficiently to evenly distribute the flatting agent.
________________

The painter claims a 3rd coat will fix everything.

Probably will.
________________

Any suggestions? Thanks.

It's the painter's problem, not yours.

--
dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico