We have a houseguest this Christmas, unfortunately.

This person insists on turning the dials on our old (late 70s) GE
electric range the wrong way to set the temperature. In other words,
instead of going from off to low to medium to medium high to high, just
turn the knob from off straight to high, and from high back to off.

The knobs DO turn freely 360 degrees and offer no resistance to being
turned this way.

But something just makes me think this is wrong and will damage either
the knob or part of the electronics.

Is twisting the knob the wrong way - going directly between off and high
without twisting past the lower temperatures - in any way damaging to
anything other than my blood pressure?

if it turns freely, no.

randy

Is twisting the knob the wrong way - going directly between off and high
without twisting past the lower temperatures - in any way damaging to
anything other than my blood pressure?

"trader-of-some-jacks" wrote in message
...
We have a houseguest this Christmas, unfortunately.

This person insists on turning the dials on our old (late 70s) GE
electric range the wrong way to set the temperature. In other words,
instead of going from off to low to medium to medium high to high, just
turn the knob from off straight to high, and from high back to off.

The knobs DO turn freely 360 degrees and offer no resistance to being
turned this way.

This shouldn't be a problem at all.

But something just makes me think this is wrong and will damage either
the knob or part of the electronics.

Is twisting the knob the wrong way - going directly between off and
high without twisting past the lower temperatures - in any way
damaging to anything other than my blood pressure?


You have serious control issues, and I'm not talking about the controls on
the stove. I have them too and they are damn hard to supress, but for
everyone's sake we must try to get over micromanaging peple.

It is perfectly OK to operate the stove this way.

It won't do a thing, don't worry about it.

If the manufacturer of the range didn't intend for the knobs to turn that
way, they would have made them so that they couldn't be turned that way.

wrote in message
oups.com...
It won't do a thing, don't worry about it.

trader-of-some-jacks wrote:
We have a houseguest this Christmas, unfortunately.

This person insists on turning the dials on our old (late 70s) GE
electric range the wrong way to set the temperature. In other words,
instead of going from off to low to medium to medium high to high,
just turn the knob from off straight to high, and from high back to
off.

You're lucky. My houseguest insisted on reversing the toilet tissue.

I removed the spindle.

trader-of-some-jacks wrote:
We have a houseguest this Christmas, unfortunately.

This person insists on turning the dials on our old (late 70s) GE
electric range the wrong way to set the temperature. In other words,

instead of going from off to low to medium to medium high to high,
just
turn the knob from off straight to high, and from high back to off.

The knobs DO turn freely 360 degrees and offer no resistance to being

turned this way.

But something just makes me think this is wrong and will damage
either
the knob or part of the electronics.

Is twisting the knob the wrong way - going directly between off and
high
without twisting past the lower temperatures - in any way damaging to

anything other than my blood pressure?

Hi,

Won't hurt anything in the surface switch!

anything other than my blood pressure?

Can't help you with that
jeff.
Appliance Repair Aid
http://www.applianceaid.com/

In article ,
trader-of-some-jacks wrote:
We have a houseguest this Christmas, unfortunately.

This person insists on turning the dials on our old (late 70s) GE
electric range the wrong way to set the temperature. In other words,
instead of going from off to low to medium to medium high to high, just
turn the knob from off straight to high, and from high back to off.

The knobs DO turn freely 360 degrees and offer no resistance to being
turned this way.

But something just makes me think this is wrong and will damage either
the knob or part of the electronics.

Is twisting the knob the wrong way - going directly between off and high
without twisting past the lower temperatures - in any way damaging to
anything other than my blood pressure?

How do you know that YOUR way is the right way?
--

Larry Wasserman Baltimore, Maryland

Why on earth would you even let a visitor cook - proper host/hostess's
should be doing all the cooking/catering/waiting/washing/etc kitchen duties.
Be a good Host & Make some 'Off limits to guests' signs .

Magnets are handy to hold the grocery store receipt to the fridge.

"trader-of-some-jacks" wrote in message
...
We have a houseguest this Christmas, unfortunately.

This person insists on turning the dials on our old (late 70s) GE
electric range the wrong way to set the temperature. In other words,
instead of going from off to low to medium to medium high to high, just
turn the knob from off straight to high, and from high back to off.

The knobs DO turn freely 360 degrees and offer no resistance to being
turned this way.

But something just makes me think this is wrong and will damage either
the knob or part of the electronics.

Is twisting the knob the wrong way - going directly between off and high
without twisting past the lower temperatures - in any way damaging to
anything other than my blood pressure?