Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
My new bathroom faucet may arrive in the mail today. This will be my
first repair of this nature and I have a question. Thank you for any comments! Q: Since applying the supply lines to the faucet seems like the most difficult part of the job, why wouldn't someone push the supply lines through the top of the vanity and attach them to the faucet first (with plumbers tape, of course)? The plastic nuts, which secure the faucet to the vanity, could be slipped over the supply lines first for instance, and attached where they belong afterward. I ask this question, because the process I described doesn't appear to be the normal procedure. Thank you! Bill |
#2
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On 10/19/17 9:07 AM, Bill wrote:
My new bathroom faucet may arrive in the mail today. This will be my first repair of this nature and I have a question.Â* Thank you for any comments! Q: Since applying the supply lines to the faucet seems like the most difficult part of the job, why wouldn't someone push the supply lines through the top of the vanity and attach them to the faucet first (with plumbers tape, of course)?Â* The plastic nuts, which secure the faucet to the vanity, could be slipped over the supply lines first for instance, and attached where they belong afterward.Â*Â* I ask this question, because the process I described doesn't appear to be the normal procedure. Thank you! Bill If you're using screw-on flexible supply hoses from the shut off valves to the faucet, I'm not sure you're supposed to use tape. |
#3
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
Bobby Axelrod wrote:
On 10/19/17 9:07 AM, Bill wrote: My new bathroom faucet may arrive in the mail today. This will be my first repair of this nature and I have a question. Thank you for any comments! Q: Since applying the supply lines to the faucet seems like the most difficult part of the job, why wouldn't someone push the supply lines through the top of the vanity and attach them to the faucet first (with plumbers tape, of course)? The plastic nuts, which secure the faucet to the vanity, could be slipped over the supply lines first for instance, and attached where they belong afterward. I ask this question, because the process I described doesn't appear to be the normal procedure. Thank you! Bill If you're using screw-on flexible supply hoses from the shut off valves to the faucet, I'm not sure you're supposed to use tape. We are talking about "teflon-tape", right? I don't see how it could hurt. |
#4
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thu, 19 Oct 2017 09:46:07 -0400, Bill
wrote: Bobby Axelrod wrote: On 10/19/17 9:07 AM, Bill wrote: My new bathroom faucet may arrive in the mail today. This will be my first repair of this nature and I have a question. Thank you for any comments! Q: Since applying the supply lines to the faucet seems like the most difficult part of the job, why wouldn't someone push the supply lines through the top of the vanity and attach them to the faucet first (with plumbers tape, of course)? The plastic nuts, which secure the faucet to the vanity, could be slipped over the supply lines first for instance, and attached where they belong afterward. I ask this question, because the process I described doesn't appear to be the normal procedure. Thank you! Bill If you're using screw-on flexible supply hoses from the shut off valves to the faucet, I'm not sure you're supposed to use tape. We are talking about "teflon-tape", right? I don't see how it could hurt. It is not required because the threads do not do the sealing, and tape COULD interfere with proper seating of the rubber seal. DO NOT use teflon tape on self-seal supply hoses. If they are standard pipe thread fittings, use tape. |
#5
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thursday, October 19, 2017 at 9:39:08 AM UTC-4, Bobby Axelrod wrote:
On 10/19/17 9:07 AM, Bill wrote: My new bathroom faucet may arrive in the mail today. This will be my first repair of this nature and I have a question.Â* Thank you for any comments! Q: Since applying the supply lines to the faucet seems like the most difficult part of the job, why wouldn't someone push the supply lines through the top of the vanity and attach them to the faucet first (with plumbers tape, of course)?Â* The plastic nuts, which secure the faucet to the vanity, could be slipped over the supply lines first for instance, and attached where they belong afterward.Â*Â* I ask this question, because the process I described doesn't appear to be the normal procedure. Thank you! Bill If you're using screw-on flexible supply hoses from the shut off valves to the faucet, I'm not sure you're supposed to use tape. Good point, you're right, you don't use tape on those. As to connecting the supply line first, then slipping it through, you can do that, as long as it works with that particular faucet. IDK what they do with bath faucets today, but kitchen faucets typically have supply hoses already attached that extend down about a foot. You then hook your supply line from the angle valve to the hose end from the faucet. If you use flex supply lines, no reason you can't do it with a bath faucet as long as it will still attach to the sink, ie if there is a nut, that it will slip over, etc. It would be easier, which is I presume why the switched to that with the kitchen faucets. No more need for a basin wrench either, they use a hex head nut that tightens against a backing plate, you use a socket with extension. |
#6
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
trader_4 wrote:
No more need for a basin wrench either, they use a hex head nut that tightens against a backing plate, you use a socket with extension. Yes, I can reach the plastic nuts. And the existing hoses look long enough to do as I described. I am doing all this because last time I replaced some rubber parts to stop a drip, I ended up stripping the set screw. So here I am.. Thanks! Bill |
#7
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thursday, October 19, 2017 at 10:34:02 AM UTC-4, Bill wrote:
trader_4 wrote: No more need for a basin wrench either, they use a hex head nut that tightens against a backing plate, you use a socket with extension. Yes, I can reach the plastic nuts. And the existing hoses look long enough to do as I described. I am doing all this because last time I replaced some rubber parts to stop a drip, I ended up stripping the set screw. So here I am.. Thanks! Bill If they are flexible hoses, unless they are only a few years old, I'd replace them. HD, etc has them in various lengths, they don't cost much. |
#8
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thu, 19 Oct 2017 09:39:05 -0400, Bobby Axelrod
wrote: On 10/19/17 9:07 AM, Bill wrote: My new bathroom faucet may arrive in the mail today. This will be my first repair of this nature and I have a question.* Thank you for any comments! Q: Since applying the supply lines to the faucet seems like the most difficult part of the job, why wouldn't someone push the supply lines through the top of the vanity and attach them to the faucet first (with plumbers tape, of course)?* The plastic nuts, which secure the faucet to the vanity, could be slipped over the supply lines first for instance, and attached where they belong afterward.** I ask this question, because the process I described doesn't appear to be the normal procedure. Thank you! Bill If you're using screw-on flexible supply hoses from the shut off valves to the faucet, I'm not sure you're supposed to use tape. You are not. |
#9
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
replying to Bill, Iggy wrote:
A valid question and I've pre-attached the flexible and even straight-shot rigid supply lines whenever possible. However, they do sometimes get in the way and make a basin wrench more difficult to use, because you can't see through the supply lines to know if you're turning what you hope you are. Where it really becomes a problem is with the cabinet size and style. You don't get many view angles in a 24" cabinet and same goes for cabinets that have a center stile between the doors. Wall Hung and Pedestal sinks can be quite tight and having the supply lines on can interfere with a basin wrench's use, on the handle end. Remember, Supply Valves are usually in the way too and, commonly, even the drain pipe from the wall or floor. -- for full context, visit https://www.homeownershub.com/mainte...n-1147837-.htm |
#10
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
Iggy wrote:
replying to Bill, Iggy wrote: A valid question and I've pre-attached the flexible and even straight-shot rigid supply lines whenever possible. However, they do sometimes get in the way and make a basin wrench more difficult to use, because you can't see through the supply lines to know if you're turning what you hope you are. Where it really becomes a problem is with the cabinet size and style. You don't get many view angles in a 24" cabinet and same goes for cabinets that have a center stile between the doors. Wall Hung and Pedestal sinks can be quite tight and having the supply lines on can interfere with a basin wrench's use, on the handle end. Remember, Supply Valves are usually in the way too and, commonly, even the drain pipe from the wall or floor. Yes, things are tight enough under there that the less time I have to be there, the better I'll like it! |
#11
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thu, 19 Oct 2017 16:19:05 -0400, Bill
wrote: Iggy wrote: replying to Bill, Iggy wrote: A valid question and I've pre-attached the flexible and even straight-shot rigid supply lines whenever possible. However, they do sometimes get in the way and make a basin wrench more difficult to use, because you can't see through the supply lines to know if you're turning what you hope you are. Where it really becomes a problem is with the cabinet size and style. You don't get many view angles in a 24" cabinet and same goes for cabinets that have a center stile between the doors. Wall Hung and Pedestal sinks can be quite tight and having the supply lines on can interfere with a basin wrench's use, on the handle end. Remember, Supply Valves are usually in the way too and, commonly, even the drain pipe from the wall or floor. Yes, things are tight enough under there that the less time I have to be there, the better I'll like it! All the more reason to use the flex hose connections. They use a rubber gasket and you can get them for 3/8" compression or 1/2" threaded connections in any combination. Get the appropriate ones for your setup and off you go. |
#12
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
|
#13
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thu, 19 Oct 2017 16:57:27 -0400, Bill
wrote: wrote: On Thu, 19 Oct 2017 16:19:05 -0400, Bill wrote: Iggy wrote: replying to Bill, Iggy wrote: A valid question and I've pre-attached the flexible and even straight-shot rigid supply lines whenever possible. However, they do sometimes get in the way and make a basin wrench more difficult to use, because you can't see through the supply lines to know if you're turning what you hope you are. Where it really becomes a problem is with the cabinet size and style. You don't get many view angles in a 24" cabinet and same goes for cabinets that have a center stile between the doors. Wall Hung and Pedestal sinks can be quite tight and having the supply lines on can interfere with a basin wrench's use, on the handle end. Remember, Supply Valves are usually in the way too and, commonly, even the drain pipe from the wall or floor. Yes, things are tight enough under there that the less time I have to be there, the better I'll like it! All the more reason to use the flex hose connections. They use a rubber gasket and you can get them for 3/8" compression or 1/2" threaded connections in any combination. Get the appropriate ones for your setup and off you go. Okay, you've talked me into it. Home Depot should give you a commission. My reason for not replacing them, was that removing the old ones runs the risk of conceivably damaging the shut-off valves, but that doesn't seem like a good excuse--unless I somehow damage the shut-off valves, and in that case I'll be sorry! Hold the shut off valve with a wrench (or anything?) while removing the hose? Bill Those hose connections can be finger tight and still work. I usually get them as tight as I can with my old arthritic fingers then put another 1/4-1/2 turn with a wrench but that is still not "break the pipe off" tight. |
#14
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
On Thu, 19 Oct 2017 16:57:27 -0400, Bill
wrote: wrote: On Thu, 19 Oct 2017 16:19:05 -0400, Bill wrote: Iggy wrote: replying to Bill, Iggy wrote: A valid question and I've pre-attached the flexible and even straight-shot rigid supply lines whenever possible. However, they do sometimes get in the way and make a basin wrench more difficult to use, because you can't see through the supply lines to know if you're turning what you hope you are. Where it really becomes a problem is with the cabinet size and style. You don't get many view angles in a 24" cabinet and same goes for cabinets that have a center stile between the doors. Wall Hung and Pedestal sinks can be quite tight and having the supply lines on can interfere with a basin wrench's use, on the handle end. Remember, Supply Valves are usually in the way too and, commonly, even the drain pipe from the wall or floor. Yes, things are tight enough under there that the less time I have to be there, the better I'll like it! All the more reason to use the flex hose connections. They use a rubber gasket and you can get them for 3/8" compression or 1/2" threaded connections in any combination. Get the appropriate ones for your setup and off you go. Okay, you've talked me into it. Home Depot should give you a commission. My reason for not replacing them, was that removing the old ones runs the risk of conceivably damaging the shut-off valves, but that doesn't seem like a good excuse--unless I somehow damage the shut-off valves, and in that case I'll be sorry! Hold the shut off valve with a wrench (or anything?) while removing the hose? Bill Yes. |
#16
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
|
#17
Posted to alt.home.repair
|
|||
|
|||
Bathroom faucet replacement question
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New kitchen faucet installed; old faucet autopsied | Metalworking | |||
Rohl faucet bathroom-----question.. have deep sink bathroom--push updain doesnt open enough.. | Home Repair | |||
Need help in identifying a faucet knob for this faucet stem (or vice versa) | Home Repair | |||
How to remove a Symmons shower faucet TA-25B shower faucet volume control spindle | Home Repair | |||
bathroom faucet replacement | Home Repair |