Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Toilet Repairs
OK, shot 25-year-old fill valve was removed after much drama (had to
disassemble furniture around toilet; could not budge locknut and had to use bolt cutter). Installed (finally!) Fluidmaster plastic fill valve, which went perfectly fine on the last toilet I put one on, but not here. I can't tighten the dang thing. It seems there's a *heavy* foam insulation inside the tank and the old (metal) fill valve just got the tighten-the-hell-out-of-it treatment, making it sink into the foam. But with this plastic valve and a nylon locknut, I'm afraid to do that, given the strong DO NOT OVERTIGHTEN remarks in the instructions. I kept to the strict hand-tighten, plus 1/4 turn with a wrench rule. So what I have is a drippy fill valve. Should I just tighten it more, reasoning that the foam will be crushed, easing any overpressure on the plastic? Or should I cut away part of the foam, so the plastic can make direct contact with the porcelain as designed? Or what? It almost seems inconsequential that the standard oval handle on the shut-off valve more or less instantly crumbled on being grabbed by a wrench (had to, it was frozen), and the screw won't come out, so I'll have to have my brother sweat-solder a new valve in. Am I the only one here who can contemplate almost any other project with an even temper, but the very thought of plumbing makes my blood pressure sizzle? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HELP... water leak at base of toilet when showering | Home Repair | |||
Aaargh Killing black growth in toilet w/o killing 22 pound cat | Home Repair | |||
Question about New Kohler Toilet ... | Home Repair | |||
Run on toilet paper predicted | Home Repair | |||
Help with toilet water supply and vibrating pipes | Home Repair |