Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Tiling a not-flat floor
Hey, list. I was getting ready to tile the concrete floor of the kids' new
basement playroom and decided to check my how-to-tile book (Setting Tile by Michael Byrne). Just to see if I was missing anything, you know. Apparently, I am. Byrne makes quite a point of the importance of a flat floor. Specifically, he says that a concrete slab shouldn't be more than one-eighth out of level in 10 feet. Well. I had noticed that the floor dropped off toward one end of the room. So, I took a level to it and discovered that it dropped about 1.25 inches in about eight feet. This is a relatively new (2000) slab. It's not cracked. It just slopes at one end. I laid the tiles (12 inches square) out on the floor and identified the location where they rock slightly. So I presume that is where the slope begins. It seems to me I could easily compensate for this with a little extra thinset. But I don't know if that's the best course. The author doesn't say what will or could happen if I go ahead and tile a floor like this. So, I'll put it to you folks: How far up S**t Creek am I? Mark |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Concrete floor in Victorian flat - How is it held up ? | UK diy | |||
ceramic floor tiling prep. | UK diy | |||
Bathroom floor tiling question | Home Repair | |||
Tiling the floor... | UK diy |