Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Wood Burning Insert Question
I currently have a good (Majestic) zero clearance fireplace with a fan
around the box that we use to heat our entire (2200sf) 2 story house. The problem is that we go through a lot of firewood (approx 5 cords) each year. I am interested in installing a wood burning insert. Some say that I would need to replace the existing flue, which is approximately 25 ft long, with one that is a narrower diameter in order to get the correct draw. Other say that it's not necessary. I am interested in hearing about the experiences from those that have installed wood burning stove inserts. Thanks, M.Paul |
#2
|
|||
|
|||
Wood Burning Insert Question
I have two wood burning inserts, one in the basement and one on the second
floor. They have been in for 20 years and were installed using full size flue tiles. One (basement) will heat the whole house, 4000 sq ft., except on the coldest days. I live in west central Alabama however. G. |
#3
|
|||
|
|||
Wood Burning Insert Question
On Mon, 24 Nov 2003 08:34:04 -0800, "M.Paul"
wrote: I currently have a good (Majestic) zero clearance fireplace with a fan around the box that we use to heat our entire (2200sf) 2 story house. The problem is that we go through a lot of firewood (approx 5 cords) each year. I am interested in installing a wood burning insert. Some say that I would need to replace the existing flue, which is approximately 25 ft long, with one that is a narrower diameter in order to get the correct draw. Other say that it's not necessary. I am interested in hearing about the experiences from those that have installed wood burning stove inserts. Thanks, M.Paul I'm using a Avalon Rainier insert which has the optional blowers. Last year I used one cord but had to ration my usage. This year I started with two cords. As a single home owner my insert use is in the evenings after work and my days off. So far this year my gas usage is under 40% of what I used at this time last year when I was rationing. Average temp inside the house is much nicer |
#4
|
|||
|
|||
Wood Burning Insert Question
Every house I've ever walked in that used wood for heat had bad air quality.
Save a few bucks and ruin my lungs. I think not.... |
#5
|
|||
|
|||
Wood Burning Insert Question
"Trader" wrote in message et... Every house I've ever walked in that used wood for heat had bad air quality. Save a few bucks and ruin my lungs. I think not.... I hope you don't live or ever go to a major city. I wouldn't want you to wreck your virgin lungs on any of that nasty smog....in fact I hope you don't drive a car or work in an office, those might be detrimental to your health too. |
#6
|
|||
|
|||
Wood Burning Insert Question
Tim,
I agree that there are many health hazards out there and you can't avoid all of them. But every house I've ever walked into that burned wood had a very strong smoke smell to the house and the air was very, very dry. My wife and myself can't tolerate the smoke that is added to the air we breathe. My father-in-law burs wood in his house in Vermont (too cheap to use the propane and he has cash) and we stopped going because of the stove. We would wake up with dry throats and the smoke smell became sickening. I also have a wood burning insert and stopped using it. My ceilings also needed to be painted not to mention all the mess that goes with wood - dirt, bugs and trying to get the darn thing lit. Personally I think gas logs are the way to go. But some people like to be fire tenders and save money. Although, I'm not sure how much they can save........PS HD sells wood pellets for most stoves. These pellets burn super clean. This might be an alternative to wood. Bugs don't eat the stuff and it doesn't freeze together like wood or rot. I hope you don't live or ever go to a major city. I wouldn't want you to wreck your virgin lungs on any of that nasty smog....in fact I hope you don't drive a car or work in an office, those might be detrimental to your health too. |
#7
|
|||
|
|||
Wood Burning Insert Question
Tim,
I agree that there are many health hazards out there and you can't avoid all of them. But every house I've ever walked into that burned wood had a very strong smoke smell to the house and the air was very, very dry. My wife and myself can't tolerate the smoke that is added to the air we breathe. My father-in-law burs wood in his house in Vermont (too cheap to use the propane and he has cash) and we stopped going because of the stove. We would wake up with dry throats and the smoke smell became sickening. I also have a wood burning insert and stopped using it. My ceilings also needed to be painted not to mention all the mess that goes with wood - dirt, bugs and trying to get the darn thing lit. Personally I think gas logs are the way to go. But some people like to be fire tenders and save money. Although, I'm not sure how much they can save........PS HD sells wood pellets for most stoves. These pellets burn super clean. This might be an alternative to wood. Bugs don't eat the stuff and it doesn't freeze together like wood or rot. I hope you don't live or ever go to a major city. I wouldn't want you to wreck your virgin lungs on any of that nasty smog....in fact I hope you don't drive a car or work in an office, those might be detrimental to your health too. |
#8
|
|||
|
|||
Wood Burning Insert Question
On Mon, 24 Nov 2003 23:14:21 GMT, "Trader"
wrote: Every house I've ever walked in that used wood for heat had bad air quality. Save a few bucks and ruin my lungs. I think not.... But were any of them inserts? Closed door systems don't add particles to the air with a possible exception of the few seconds it takes to add wood. |
#9
|
|||
|
|||
Wood Burning Insert Question
We had one custom made 22 years ago. It's great. I can burn 1/2 of a 24"
round at a time. That'll generally burn 6-8 hours unless it's really cold and we crank 'er up good. the thing that I find makes this one so good, it the circulation features we had built in to it. We had a basic shell, then an outer shell with wide front, powered air inputs on both sides that circulate around the shell, then out the to over the front which serves to hear the air further. We can move one helluva lot of air. the zero clearance feature mostly serves as a cold air return that pulls cooler air from the back of the house to the stove. BTW, the bottom, back and sides 1/2 way up. are fire brick lined. Our flue is the original 8x10" masonry inside a 3x4' brick structure. The only thing that's sort of a pain in the _ss is having to pull it out when the chimney needs cleaning. I only have to clean mine every 3-4 years. Once every couple of days, I really crank'er up after having thrown in a scoop of creosote preventer on a hot bed of coals. We;ve got an old Ashley wood stove in the family room in case it gets really cold but I've only used it 1/2 dozen or so times in 20 years.mostly when we get in from the snow or hunting. BTW we live near the Hells Canyon National Recreation area and get in the neighborhood of 160" of snow with average temps of 10-25 from dec - mar. the house is near 2200ft and we probably don't burn 5 cords yr. I have some friends that had one built buy the same guy from our design but they added propane capabilities to theirs so they could have heat when they were gone. Have a good one, tHAT "M.Paul" wrote in message ... I currently have a good (Majestic) zero clearance fireplace with a fan around the box that we use to heat our entire (2200sf) 2 story house. The problem is that we go through a lot of firewood (approx 5 cords) each year. I am interested in installing a wood burning insert. Some say that I would need to replace the existing flue, which is approximately 25 ft long, with one that is a narrower diameter in order to get the correct draw. Other say that it's not necessary. I am interested in hearing about the experiences from those that have installed wood burning stove inserts. Thanks, M.Paul |
#10
|
|||
|
|||
Wood Burning Insert Question
On Mon, 24 Nov 2003 08:34:04 -0800, "M.Paul"
wrote: Some say that I would need to replace the existing flue, which is approximately 25 ft long, with one that is a narrower diameter in order to get the correct draw. Forgot to answer this part. The installation crew used a stainless steel chimney liner on mine. Been a couple of years back now so I don't recall all the details but I do recollect code being mentioned as one reason. |
#11
|
|||
|
|||
Wood Burning Insert Question
Your Majestic has a thermosiphen triple wall chimney UL listed to UL103 to
1,700 degrees. A wood stove requires UL103HT which goes to 2,100 degrees. You should not install an insert inside the Majestic unless it has been tested and approved for use in prefab fireplaces. -- John Galbreath Jr. http://www.firelogs.com/ Irondale, Alabama 888.321.Logs "M.Paul" wrote in message ... I currently have a good (Majestic) zero clearance fireplace with a fan around the box that we use to heat our entire (2200sf) 2 story house. The problem is that we go through a lot of firewood (approx 5 cords) each year. I am interested in installing a wood burning insert. Some say that I would need to replace the existing flue, which is approximately 25 ft long, with one that is a narrower diameter in order to get the correct draw. Other say that it's not necessary. I am interested in hearing about the experiences from those that have installed wood burning stove inserts. Thanks, M.Paul |
#12
|
|||
|
|||
Wood Burning Insert Question
Your Majestic has a thermosiphen triple wall chimney UL listed to UL103 to
1,700 degrees. A wood stove requires UL103HT which goes to 2,100 degrees. You should not install an insert inside the Majestic unless it has been tested and approved for use in prefab fireplaces. -- John Galbreath Jr. http://www.firelogs.com/ Irondale, Alabama 888.321.Logs "M.Paul" wrote in message ... I currently have a good (Majestic) zero clearance fireplace with a fan around the box that we use to heat our entire (2200sf) 2 story house. The problem is that we go through a lot of firewood (approx 5 cords) each year. I am interested in installing a wood burning insert. Some say that I would need to replace the existing flue, which is approximately 25 ft long, with one that is a narrower diameter in order to get the correct draw. Other say that it's not necessary. I am interested in hearing about the experiences from those that have installed wood burning stove inserts. Thanks, M.Paul |
#13
|
|||
|
|||
Wood Burning Insert Question
Thank you to all for your inputs. I know that to burn less wood I need
something that I can close down. I was thinking that to save money I would buy one of the many used inserts advertised in the newspaper classified ads, as many people I know have simply put any insert that would fit into their fireplace and have had no problems. I am also concerned about safety. So, for piece of mind, I will find out what the manufacturer recommends - and if needed have the flue reworked. BTW, I currently have a galvenized two-wall - non-masonary flue. Thanks again for your replies. M.Paul |
#14
|
|||
|
|||
Wood Burning Insert Question
Thank you to all for your inputs. I know that to burn less wood I need
something that I can close down. I was thinking that to save money I would buy one of the many used inserts advertised in the newspaper classified ads, as many people I know have simply put any insert that would fit into their fireplace and have had no problems. I am also concerned about safety. So, for piece of mind, I will find out what the manufacturer recommends - and if needed have the flue reworked. BTW, I currently have a galvenized two-wall - non-masonary flue. Thanks again for your replies. M.Paul |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
### micro-FAQ on wood # 011 | Woodworking | |||
Wood Burning Device | Woodturning | |||
### Micro-FAQ on wood # 002 | Woodworking | |||
### everything you always wanted to know about wood (aka "micro-FAQ on wood") | Woodworking | |||
glue question for wet wood | Woodworking |