Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Stuck windows
I bought a building and on floor there is 11 windows, all single
pane,they are all painted shut!!!!! How can i get them unstuck..I have dug at them with a utility knife and no way can not get them to move thanks in advance Jim |
#2
|
|||
|
|||
Stuck windows
putty knife, not utility knife.
"Jim" wrote in message ... I bought a building and on floor there is 11 windows, all single pane,they are all painted shut!!!!! How can i get them unstuck..I have dug at them with a utility knife and no way can not get them to move thanks in advance Jim |
#3
|
|||
|
|||
Stuck windows
Tap a putty knife into the joints with paint. It can be real hard to
unstick windows. "Jim" wrote in message ... I bought a building and on floor there is 11 windows, all single pane,they are all painted shut!!!!! How can i get them unstuck..I have dug at them with a utility knife and no way can not get them to move thanks in advance Jim |
#4
|
|||
|
|||
Stuck windows
Hi,
at the paint store you can buy a tool called a "window zipper". It is used to saw out the paint between the parting bead, etc., of wooden windows. Don't know how well it works on aluminium or vinyl tracks. Casey "Jim" wrote in message ... I bought a building and on floor there is 11 windows, all single pane,they are all painted shut!!!!! How can i get them unstuck..I have dug at them with a utility knife and no way can not get them to move thanks in advance Jim |
#5
|
|||
|
|||
Stuck windows
Use a 1" putty knife. Holding the blade against the window so it flexes flat
against the window "face", tap the edge of the blade with a hammer so that it slices through the paint and into the gap between the window and the frame. Once it reaches into the gap, turn the blade so that you can continue tapping it along the whole window side. It should extend only about 1/4" into the gap so that it doesn't cut into the wood. They greatest potential for damage is while getting the blade into the gap the first time. Bob "Jim" wrote in message ... I bought a building and on floor there is 11 windows, all single pane,they are all painted shut!!!!! How can i get them unstuck..I have dug at them with a utility knife and no way can not get them to move thanks in advance Jim |
#6
|
|||
|
|||
Stuck windows
On Fri, 11 Jul 2003 21:26:26 -0400, Jim
wrote: I bought a building and on floor there is 11 windows, all single pane,they are all painted shut!!!!! How can i get them unstuck..I have dug at them with a utility knife and no way can not get them to move Depends on the design of the window. If they are sliding windows, it works well to take them apart. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Windows, multi-reply for Mr. McArdle. | UK diy | |||
[OT] Car insurance craziness | UK diy | |||
Vinyl windows and siding: need to make decision | Home Repair |