Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Fake fence post corner?
I have an issue with a street light wire weaving in and out of my property
line. I was able to dig one hole about as safely as I could near the front of the house. I need to bring it up a little further but then it will lead into the wire coming in on an angle. I am already working around this wire and sitting in almost 2ft into my property. If I put another post at angle, and instead of putting the fence panel on angle, build it out to 90 degree as normal and put a stabilizer post maybe either on top of a few inches of tamped gravel, or on top of a deck concrete block buried into the ground a little. OR just sit it into the dirt tamped a little and do nothing else with it other than use it to keep the fence from sagging in that little area, if that would even be a problem. The distance would probably be 3ft to the other angled post. Same thing for the utility boxes in the back. I was going to box around them to keep them outside but there are so many wires and that stupid street light wire comes in on an angle there.. So if I fake the corner post on that one too.. I figure the load from the wind would push on to the connecting posts.. I have drawn pictures to show an example.. |
#2
Posted to alt.home.repair
|
|||
|
|||
Fake fence post corner?
On 09/12/2016 01:14 AM, Jeff wrote:
I have an issue with a street light wire weaving in and out of my property line. What's the problem? Sounds like free electricity to me. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Digging fence post holes - auger or "post hole digger"? | UK diy | |||
Fence Post Repair. Fencemender, E-Z Mender, Post Buddy, or other? | Home Repair | |||
Repair vinyl siding corner post | Home Repair | |||
homebase kitchen cabinets corner post | UK diy | |||
suggestions on cutting flutes on a corner post? | Woodworking |