Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal.
The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Paul |
#2
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
In alt.home.repair, on Wed, 22 Jul 2015 19:25:51 -0700 (PDT), Pavel314
wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Paul You should measure the voltage. IIUC electric stoves use what I call 220V but the light bulb and analog clock when they had them, and probably all the electronics now** use one leg of the 220 plus a neutral wire to get what I call 110 which is usually 117, no higher. Higher voltage will burn out bulbs. What about other incandescent bulbs in your house? Are they burning out faster than normal? I have a feeling there's something I'm leaving out. **Well, it starts off at 117 but is dropped to 12 or so for the electronics. |
#3
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
Pavel314 wrote:
The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Did you use a bulb designed for oven use? |
#4
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
Bob F wrote:
Pavel314 wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Did you use a bulb designed for oven use? Agreed. Did you purchase a 130 volt 40 watt "Appliance Bulb"? If not, do so in readiness for the next bulb burnout. To help keep a bulb's base from "sticking" in the socket. just rub the bulb's base on the sides of your nose while turning it a few times before installing it. The "nasal sebum", a natural oil on your nose skin will do the job. Jeff -- Jeffry Wisnia (W1BSV + Brass Rat '57 EE) The speed of light is 1.8*10^12 furlongs per fortnight. |
#5
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
micky wrote on 23/07/2015 :
In alt.home.repair, on Wed, 22 Jul 2015 19:25:51 -0700 (PDT), Pavel314 wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Paul You should measure the voltage. IIUC electric stoves use what I call 220V but the light bulb and analog clock when they had them, and probably all the electronics now** use one leg of the 220 plus a neutral wire to get what I call 110 which is usually 117, no higher. Higher voltage will burn out bulbs. What about other incandescent bulbs in your house? Are they burning out faster than normal? I have a feeling there's something I'm leaving out. **Well, it starts off at 117 but is dropped to 12 or so for the electronics. When are you going to learn that the nominal voltage in the USA is 120volts and it has been for quite a few years now. :-? -- John G Sydney. |
#6
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On Wednesday, July 22, 2015 at 11:58:40 PM UTC-4, micky wrote:
In alt.home.repair, on Wed, 22 Jul 2015 19:25:51 -0700 (PDT), Pavel314 wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Paul You should measure the voltage. IIUC electric stoves use what I call 220V but the light bulb and analog clock when they had them, and probably all the electronics now** use one leg of the 220 plus a neutral wire to get what I call 110 which is usually 117, no higher. Higher voltage will burn out bulbs. What about other incandescent bulbs in your house? Are they burning out faster than normal? I have a feeling there's something I'm leaving out. **Well, it starts off at 117 but is dropped to 12 or so for the electronics. No problem with the rest of the bulbs in the house, just the oven bulb. I'll try a voltage check. |
#7
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On Thursday, July 23, 2015 at 12:28:30 AM UTC-4, Jeff Wisnia wrote:
Bob F wrote: Pavel314 wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Did you use a bulb designed for oven use? Agreed. Did you purchase a 130 volt 40 watt "Appliance Bulb"? If not, do so in readiness for the next bulb burnout. To help keep a bulb's base from "sticking" in the socket. just rub the bulb's base on the sides of your nose while turning it a few times before installing it. The "nasal sebum", a natural oil on your nose skin will do the job. Jeff -- Jeffry Wisnia (W1BSV + Brass Rat '57 EE) The speed of light is 1.8*10^12 furlongs per fortnight. I bought what was labeled as an appliance bulb but am not sure of the voltage rating. I'll check that when I get home. |
#8
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On 7/23/2015 9:02 AM, Pavel314 wrote:
What about other incandescent bulbs in your house? Are they burning out faster than normal? No problem with the rest of the bulbs in the house, just the oven bulb. I'll try a voltage check. I'm remembering a couple moments in my life where one brand of bulb didn't last very long. And when a different brand did fine. Voltage check at the socket sounds like more work than a different brand of bulb. -- .. Christopher A. Young learn more about Jesus .. www.lds.org .. .. |
#9
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On Thursday, July 23, 2015 at 9:07:44 AM UTC-4, Stormin Mormon wrote:
On 7/23/2015 9:02 AM, Pavel314 wrote: What about other incandescent bulbs in your house? Are they burning out faster than normal? No problem with the rest of the bulbs in the house, just the oven bulb. I'll try a voltage check. I'm remembering a couple moments in my life where one brand of bulb didn't last very long. And when a different brand did fine. Voltage check at the socket sounds like more work than a different brand of bulb. -- . Christopher A. Young learn more about Jesus . www.lds.org . . My clever plan to check the socket voltage is to screw in one of those receptacle plug things, then put the meter prongs into the slots. I'd probably electrocute myself trying to insert the prongs into a live socket. I will try to change brands if any alternatives are available. |
#10
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On 07/23/2015 08:03 AM, Pavel314 wrote:
of light is 1.8*10^12 furlongs per fortnight. I bought what was labeled as an appliance bulb but am not sure of the voltage rating. I'll check that when I get home. If you are positive you got a light specifically designed for an oven, then the socket itself is bad and will need to be replaced...possibly the wiring too. If you have low voltage that will not burn out the bulb |
#11
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On 7/23/2015 9:10 AM, Pavel314 wrote:
Voltage check at the socket sounds like more work than a different brand of bulb. -- . Christopher A. Young learn more about Jesus . www.lds.org . . My clever plan to check the socket voltage is to screw in one of those receptacle plug things, then put the meter prongs into the slots. I'd probably electrocute myself trying to insert the prongs into a live socket. I will try to change brands if any alternatives are available. That should work. Ranges are often 240 VAC, and if the neutral is bad, your bulb might be getting too much voltage. -- .. Christopher A. Young learn more about Jesus .. www.lds.org .. .. |
#12
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Use a bright flashlight and take a look inside of the socket for the oven light. If it is corroded or burnt looking, it should be replaced. The heat from arcing inside of the socket can kill a light bulb prematurely. John Grabowski http://www.MrElectrician.TV |
#13
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On Wed, 22 Jul 2015 19:25:51 -0700 (PDT), Pavel314
wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. I've read you can use a potato to remove the base from the socket. Is that safe? |
#14
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
In alt.home.repair, on Wed, 22 Jul 2015 21:02:32 -0700, "Bob F"
wrote: Pavel314 wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. The new bulb lasted a couple weeks then burned out. I removed it in one piece and replaced it and now, after a couple weeks, it's burned out again. Did I just get a string of bad bulbs or could there be another reason for the quick burn outs? We're not doing any unusual cooking, same frequency, duration, and temperatures as before. Did you use a bulb designed for oven use? I thought appliance bulbs were different ony in that they were covered in plastic, so when they broke, you didn't get glass all over the inside of the oven or the fridge or the dishwaher or clothes washing machine. And maybe they are a little smaller too. |
#15
Posted to alt.home.repair
|
|||
|
|||
Oven Light Bulb
On 7/23/2015 1:40 PM, Oren wrote:
On Wed, 22 Jul 2015 19:25:51 -0700 (PDT), Pavel314 wrote: The light bulb in our electric oven worked for a long time without problems; I can't remember the last time I changed it until recently. When it burned out a few weeks ago, I tried to unscrew it but the glass bulb came off of the metal base. I had to use a piece of wood to jam into the base and turn it for removal. I've read you can use a potato to remove the base from the socket. Is that safe? Safer than fingers. I'd be tempted to wear gloves around broken glass. Might have to use a knife to point the end of the potato. -- .. Christopher A. Young learn more about Jesus .. www.lds.org .. .. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Flat bulb. Light bulb, that is. | Home Repair | |||
Changed one light bulb - now both light bulbs dont work | Home Repair | |||
Constitutionality of light bulb ban questioned - Environmental Protection Agency must be called for a broken bulb | Home Repair | |||
Pool light bulb any different than regular light bulb? | Home Repair | |||
Bug Light Bulb---any bulb for outside use that are not yellow? | Home Ownership |