| Home |
| Search |
| Today's Posts |
 |
|
Menu
| Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
| Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Older Whirlpool washer water level gauge malfunctioning causing water over flow.
Has anyone else had this problem with their older model Whirlpool Washer,
model no: LSR8233JQO. If you are not careful and switch the water lever control directly on low, medium or high the lever will stop in between the gauge and the water will continue to run and overflow because it can't read which water level it should stop at. It has ruin my hardwood floor twice . This has to be flaw that Whirlpool is aware of. PatElane -- |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Water hammer causing black water in sink/toilet/shower? | Home Repair | |||
| Hot water hammer, slow flow after draining water heater. | Home Repair | |||
| Whirlpool Washer LSQ9244EZ0 water drains during initial fill | Home Repair | |||
| Low Cold Water Washer Flow | Home Repair | |||
| Whirlpool washer stop draining water | Electronics Repair | |||
Threaded Mode
