Old GE range bake element standoff shattered -- it's a ceramic of ~5/8"
OD, 13/16" L w/ a 3/16" hole in which a little prongie off the metal
foot of the element sits. It is, apparently NLA from GE and doesn't
come w/ new bake element so I'm left w/ only one of two to hole the
element off the floor of the oven.

I've had no success on finding much close; anybody here have any ideas?
Doesn't have to be identical; two matching for the purpose would do.

Best I've come up with is from Digikey/Newark that are 1/2" OD, 3/4" L
but they're threaded for a #6 machine screw for board standoff purposes
and that's smaller ID hole than will work w/o some modifications.

If anybody's got any ideas (or has a 80's-90s vintage old range might
take a look and see if can spare )....

Only local repair guy doesn't have any in his collection of stuff which
was surprising.

--

On 3/6/14, 5:33 PM, dpb wrote:
Old GE range bake element standoff shattered -- it's a ceramic of
~5/8" OD, 13/16" L w/ a 3/16" hole in which a little prongie off the
metal foot of the element sits. It is, apparently NLA from GE and
doesn't come w/ new bake element so I'm left w/ only one of two to
hole the element off the floor of the oven.

I've had no success on finding much close; anybody here have any
ideas? Doesn't have to be identical; two matching for the purpose
would do.

Best I've come up with is from Digikey/Newark that are 1/2" OD, 3/4" L
but they're threaded for a #6 machine screw for board standoff
purposes and that's smaller ID hole than will work w/o some
modifications.

If anybody's got any ideas (or has a 80's-90s vintage old range might
take a look and see if can spare )....

Only local repair guy doesn't have any in his collection of stuff
which was surprising.

--

Try he http://www.mcmaster.com/#unthreaded-spacers/=qzbzz7

Ceramic, 1/2" OD, 3/4" L, 1/4" hole

On 3/6/2014 5:33 PM, dpb wrote:
Old GE range bake element standoff shattered -- it's a ceramic of ~5/8" OD,
13/16" L w/ a 3/16" hole in which a little prongie off the metal foot of
the element sits. It is, apparently NLA from GE and doesn't come w/ new
bake element so I'm left w/ only one of two to hole the element off the
floor of the oven.

I've had no success on finding much close; anybody here have any ideas?
Doesn't have to be identical; two matching for the purpose would do.

Best I've come up with is from Digikey/Newark that are 1/2" OD, 3/4" L but
they're threaded for a #6 machine screw for board standoff purposes and
that's smaller ID hole than will work w/o some modifications.

If anybody's got any ideas (or has a 80's-90s vintage old range might take
a look and see if can spare )....

Only local repair guy doesn't have any in his collection of stuff which was
surprising.

--

To state the obvious, have you simply tried looking at one of the big
online appliance parts suppliers? Go to google and search for 'online
appliance parts' (without the quotes) and try a few. I'm sure that somebody
has on -- at least I've never been able to stump all of them for obscure
parts although the prices can seem painful sometimes.

If you can get the part number for that part, I'd try Googling the part number to see if anyone still has them for sale online.

On 3/6/2014 5:06 PM, BenignBodger wrote:
....

To state the obvious, have you simply tried looking at one of the big
online appliance parts suppliers? ...

NLA

--

On 3/6/2014 5:03 PM, Retired wrote:
....

Try he http://www.mcmaster.com/#unthreaded-spacers/=qzbzz7

Ceramic, 1/2" OD, 3/4" L, 1/4" hole

By gosh by golly, I think'll that'll just do the trick...thanks. Don't
know why McM-C didn't come to mind.

--

On Thu, 06 Mar 2014 19:39:41 -0600, dpb wrote:

On 3/6/2014 5:03 PM, Retired wrote:
...

Try he http://www.mcmaster.com/#unthreaded-spacers/=qzbzz7

Ceramic, 1/2" OD, 3/4" L, 1/4" hole

By gosh by golly, I think'll that'll just do the trick...thanks. Don't
know why McM-C didn't come to mind.

Age? :-)

I do that too.

On 3/6/2014 5:33 PM, dpb wrote:
Old GE range bake element standoff shattered -- it's a ceramic of ~5/8"
OD, 13/16" L w/ a 3/16" hole in which a little prongie off the metal
foot of the element sits. It is, apparently NLA from GE and doesn't
come w/ new bake element so I'm left w/ only one of two to hole the
element off the floor of the oven.

I've had no success on finding much close; anybody here have any ideas?
Doesn't have to be identical; two matching for the purpose would do.

Best I've come up with is from Digikey/Newark that are 1/2" OD, 3/4" L
but they're threaded for a #6 machine screw for board standoff purposes
and that's smaller ID hole than will work w/o some modifications.

If anybody's got any ideas (or has a 80's-90s vintage old range might
take a look and see if can spare )....

Only local repair guy doesn't have any in his collection of stuff which
was surprising.

--
When I was a kid in government school, we used to
fire pottery in the art class. Wonder if you have
someone around who does pottery, and can throw and
spin and dodge, parry, thrust, and fire one for
you (Daffy Duck music inserted).
http://www.youtube.com/watch?v=8cuihrjLNAo

--
..
Christopher A. Young
Learn about Jesus
www.lds.org
..