Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Overhead Door Brand Opener Diagnostic help?
I've had this opener for a number of years. Its the Phantom belt
drive model. Always worked like a charm. The other day, however, it won't close. The opener is in the open position (door disengaged) and when I press the wall button it starts, moves about 3 inches then stops. If I press the wall button again, it moves another three inches then reversed back to the start. So - what should I check? The first thing I did was clean the optical sensors near the door bottom and aligned their beams. The are clear and pointing right at each other. Of the two only one light, the green, is on. Of course I'll now do some end to end electrical testing but I thought I would post this Q to see if anyone has any "try this" ideas. Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Low overhead garage door opener | Home Repair | |||
garage door electronics Phantom model, Overhead Door | Home Repair | |||
Overhead Door Recomendations | Home Repair | |||
overhead door garage door opener | Home Ownership | |||
Need help with an older "overhead door" garage opener | Home Repair |