Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
Put brand new batteries in the unit and it still flashes "Repl Bat".
Cleaned the contacts and checked the batteries. What to look for? -- posted from http://www.homeownershub.com/mainten...ry-746492-.htm using HomeOwnersHub's Web, RSS and Social Media Interface to home and garden related groups |
#2
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
Chuck Botts wrote in
oups.com: Put brand new batteries in the unit and it still flashes "Repl Bat". Cleaned the contacts and checked the batteries. What to look for? Check the nominal required voltage of the old and the new batteries. If the new battery has a different chemical construcyion, the voltage will be different. |
#3
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
Look for a good usenet provider, and usenet reader.
.. Christopher A. Young Learn more about Jesus www.lds.org .. .. "Chuck Botts" wrote in message oups.com... Put brand new batteries in the unit and it still flashes "Repl Bat". Cleaned the contacts and checked the batteries. What to look for? -- posted from http://www.homeownershub.com/mainten...ry-746492-.htm using HomeOwnersHub's Web, RSS and Social Media Interface to home and garden related groups |
#4
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
On Apr 28, 8:44*pm, Chuck Botts
wrote: Put brand new batteries in the unit and it still flashes "Repl Bat". Cleaned the contacts and checked the batteries. What to look for? If they are the correct batteries, I'd be looking for a new thermostat. I'd let it sit without the batteries for an hour or so just to make sure it's fully reset. -- posted fromhttp://www.homeownershub.com/maintenance/honeywell-chronotherm-iii-re... using *HomeOwnersHub's *Web, RSS and Social Media Interface to *home and garden related *groups |
#5
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
replying to Chuck Botts, Zeugma wrote:
Had the same problem. Replaced the batteries and the display still showed 'Repl Bat'. Fixed it by pulling the batteries, putting the unit back on the wall, then turning the power to the furnace off and back on. That cleared the display. Put the batteries back in the unit and all was well. -- for full context, visit https://www.homeownershub.com/mainte...ry-746492-.htm |
#6
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
Thank you so much for posting this. I followed your directions and fixed my problem!
-- For full context, visit https://www.homeownershub.com/mainte...ry-746492-.htm |
#7
Posted to alt.home.repair
|
|||
|
|||
Honeywell Chronotherm III "Replace battery"
Wow, can't believe that worked. I have thrown away a couple because of this. Thanks
-- For full context, visit https://www.homeownershub.com/mainte...ry-746492-.htm |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replace battery in Harbor Freight "solar" powered welding helmet | Metalworking | |||
Honeywell Thermostat Chronotherm IV Plus Battery Problem | Home Repair | |||
honeywell chronotherm iv - how to run fan 24/7? | Home Repair | |||
Honeywell Chronotherm III batteries | Home Repair | |||
Question Regarding Honeywell Chronotherm III | Home Repair |