Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Kohler 4620 toilet
The part of the rubber gasket/washer combination that is between the tank and the commode may be too thin; causing the tube type part of the gasket/washer that goes around the bolts to bulge out and rip when the nuts are tightened. It may be possible to avoid this by adding a thick rubber washer or washers to the bolts in the area between the existing gasket/washer and the commode. This would prevent the rubber that goes around the bolts from having too much room and bulge and rip.
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to get the tank lid off a Kohler top-trip toilet? | Home Repair | |||
Kohler 4620 toilet | Home Repair | |||
Fill Valve for Kohler One-Piece Toilet? | Home Repair | |||
Kohler Rialto toilet | Home Repair | |||
Question about New Kohler Toilet ... | Home Repair |