Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Does it matter if a Jandy valve is mounted with the INLET wrong?
On Tue, 22 May 2012 02:48:14 +0000 (UTC), "Arklin K."
wrote: c) It doesn't matter much if it's horizontal or vertical but Jandy (aka Zodiac) prefers the vertical position for leakage prevention chuckle I have a vertical and a horizontal J-valve. The vertical valve is the ONLY one that has ever leaked. O-rings wear faster. Disclaimer: It has a low voltage valve actuator - more use (solar panel valve) so I expect the leaks.... |
#2
Posted to alt.home.repair
|
|||
|
|||
Does it matter if a Jandy valve is mounted with the INLETwrong?
On Tue, 22 May 2012 09:40:55 -0700, Oren wrote:
chuckle I have a vertical and a horizontal J-valve. The vertical valve is the ONLY one that has ever leaked. O-rings wear faster Actually, I mispoke. So your experience is what Jandy suggested would happen. They prefer HORIZONTAL over vertical (it was my mistake in not proofreading my summary!). |
#3
Posted to alt.home.repair
|
|||
|
|||
Does it matter if a Jandy valve is mounted with the INLET wrong?
On Wed, 23 May 2012 01:26:34 +0000 (UTC), "Arklin K."
wrote: On Tue, 22 May 2012 09:40:55 -0700, Oren wrote: chuckle I have a vertical and a horizontal J-valve. The vertical valve is the ONLY one that has ever leaked. O-rings wear faster Actually, I mispoke. So your experience is what Jandy suggested would happen. They prefer HORIZONTAL over vertical (it was my mistake in not proofreading my summary!). Good job on the replacement valve. Looked good. Now? Why did this valve crack? Was it freeze or it just gave up the ghost? |
#4
Posted to alt.home.repair
|
|||
|
|||
Does it matter if a Jandy valve is mounted with the INLETwrong?
On Wed, 23 May 2012 12:12:33 -0700, Oren wrote:
Why did this valve crack? Was it freeze or it just gave up the ghost? It was always leaking from the day I owned the pool. I only removed it because someone suggested I fix all leaks while the pool was empty for cleaning. I suspect it cracked when the pump was running into it with the valve closed; but I don't know how it cracked. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pool Jandy valve - is there a way to repair (especially crowded) | Home Repair | |||
Does it matter if a Jandy valve is mounted with the INLET wrong? | Home Repair | |||
PVC Jandy valve -- weak screw | Home Repair | |||
Update": PVC Jandy valve -- weak screw | Home Repair | |||
Inlet Valve? | UK diy |