Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair,sci.electronics.repair
|
|||
|
|||
Maytag dishwasher suddenly stopped working
On May 7, 12:31*pm, Amanda Ripanykhazova
wrote: On mine it was not necessary to remove the upper spray arms. *The discharge housing slips (snaps) off the tube that leads to the middle and upper spray arms. PlainBill Oh that's where I went wrong! It snaps out and I wasn't prepared to apply enough force. *Thanks for confirming that, Have now found a valve so cheaply shipped and will take impeller apart to make sure it doesnt need too much attention there as well. Emphatically didnt want to lose that lower tray-cleaning level which no other dishwasher has now a days! Hey guys, you were right, the humming was a jammed solenoid on the input valve which I changed after finding one for the ten bucks i mentioned. And while the unit may still need cleaning in the impeller mechanism which I couldnt get at, it is now working properly. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Maytag dishwasher suddenly stopped working | Electronics Repair | |||
Maytag dishwasher suddenly stopped working | Electronics Repair | |||
Maytag dishwasher suddenly stopped working | Home Repair | |||
Maytag dishwasher suddenly stopped working | Home Repair | |||
Sony KV27XBR37 suddenly stopped working | Electronics Repair |