Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 455
Default unclearable toilet (toilet auger, hot water, time) (I gorged on peanut butter!)

Man, I've never had a stoppage like this before.

First, this is the one toilet in the house that has a
big exit hole, pipe, etc.

If it got blocked (before now,, that is), a home-depot
orange accordion-like
mother of all plungers usually does the trick. Change that "usually"
to "always". Until now.

I've been trying the toilet auger (doesn't scratch the visible
ceramic surface). [There was, unfortunately, a LONG time when
I didn't know toilet augers even existed -- snakes really ruin
things!]

Anyway, the 2inch long spiral thing at the end of the auger
comes out with this crap (that is the correct word) on it
that's of the consistency of thickening, curing glue, the only
way to clean it off is a BLAST of pretty high-pressure water
from outdoor water faucet. (No, wee screwdriver not sufficient.)

(I'm assuming it's from recently gorging on peanut butter, but no,
I've not tasted it to be sure. HOWEVER, for any brave volunteers
out there, I'd be happy to send you some, and YOU tell ME
what it came from.)

So, any suggestions as to what might dissolve or loosen this
stuff, so the plunger has a chance of working?

(Remember, on a 1940 or 30 house, over the years various
pipings and seals have been replaced with the plastic-like
stuff they use now. Sure don't want to harm that, if that's
what I've got.)

OK, enough for now. Gotta go back to pouring in hot
(faucet) water (drains out VERY slowly), guessing that
the heat will help it to soften up.


-----

(When I go every ten years to get one of those tv-cameras up
your rear end colon-tests (I stay awake and watch the tv, like
riding at the front car of a subway, looking out the front window),
they always run out of tube. God knows what extra processing
happens in those extra feet of colon (you know, stuff goes
in liquid, comes out solid)!)


Ideas?


Thanks,

David

  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 4,712
Default unclearable toilet (toilet auger, hot water, time) (I gorged on peanut butter!)

1) try a stew pot full of boiling water from the range. Chase everyone out
of the house, and carry it VERY carefully to the bathroom, and pour that all
down the toilet.
2) Try several ounces of crystal Drano, flush last moment before bedtime.
Don't flush the toilet again till the next morning. Leave the Drano crystals
in palce at the grease clog as long as possible.
3) Call a plumber with a big drain snake, and he can pull the toilet, and
work directly into the drain.

--

Christopher A. Young
Learn more about Jesus
www.lds.org
..

"David Combs" wrote in message
...

Ideas?

Thanks,

David



  #3   Report Post  
Posted to alt.home.repair
Joe Joe is offline
external usenet poster
 
Posts: 2,837
Default unclearable toilet (toilet auger, hot water, time) (I gorged onpeanut butter!)

On Dec 24, 11:15*am, (David Combs) wrote:
Man, I've never had a stoppage like this before.

First, this is the one toilet in the house that has a
big exit hole, pipe, etc.

If it got blocked (before now,, that is), a home-depot
orange accordion-like
mother of all plungers usually does the trick. *Change that "usually"
to "always". *Until now.

I've been trying the toilet auger (doesn't scratch the visible
ceramic surface). *[There was, unfortunately, a LONG time when
I didn't know toilet augers even existed -- snakes really ruin
things!]

Anyway, the 2inch long spiral thing at the end of the auger
comes out with this crap (that is the correct word) on it
that's of the consistency of thickening, curing glue, the only
way to clean it off is a BLAST of pretty high-pressure water
from outdoor water faucet. *(No, wee screwdriver not sufficient.)

(I'm assuming it's from recently gorging on peanut butter, but no,
I've not tasted it to be sure. *HOWEVER, for any brave volunteers
out there, I'd be happy to send you some, and YOU tell ME
what it came from.)

So, any suggestions as to what might dissolve or loosen this
stuff, so the plunger has a chance of working?

(Remember, on a 1940 or 30 house, over the years various
pipings and seals have been replaced with the plastic-like
stuff they use now. *Sure don't want to harm that, if that's
what I've got.)

OK, enough for now. *Gotta go back to pouring in hot
(faucet) water (drains out VERY slowly), guessing that
the heat will help it to soften up.

-----

(When I go every ten years to get one of those tv-cameras up
your rear end colon-tests (I stay awake and watch the tv, like
riding at the front car of a subway, looking out the front window),
they always run out of tube. *God knows what extra processing
happens in those extra feet of colon (you know, stuff goes
in liquid, comes out solid)!)

Ideas?

Thanks,

David


Pull the toilet, DIY or pro.
The problem will be resolved/obvious, so prepare a gunk container and
floor protection, wear gloves, ventilate, etc.
At this point there will be denials of complicity from everyone in
your household, so line them all up, ask 'who done it' and if there is
no response, just say. "One of you is a liar" and get to
waterboarding.
Odds are it is a female member of the household that needed to dispose
of some semiliquid product that should have been put out at curb in a
suitable container.
Use the attendant pro helper bills as an example of why such ignorance
is so costly. That way you get a little return on your money in the
future.

Good luck.

Joe
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT - Don't eat the peanut butter RB[_2_] Metalworking 0 January 19th 09 11:21 PM
OT - Don't eat the peanut butter Winston Metalworking 2 January 19th 09 04:57 AM
OT - Don't eat the peanut butter Lew Hartswick Metalworking 0 January 19th 09 04:37 AM
OT - Don't eat the peanut butter Martin H. Eastburn Metalworking 1 January 18th 09 03:14 AM


All times are GMT +1. The time now is 11:40 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"