What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

On Oct 13, 8:08*am, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

I've not seen putty used in that situation.

On Thu, 13 Oct 2011 06:12:26 -0700 (PDT), jamesgangnc
wrote:

On Oct 13, 8:08*am, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

I've not seen putty used in that situation.

Dust Seal or Duct Seal Compound is the trade designation of the
material.
--
Mr.E

wrote in message
What is the technical term for the putty that electricians use to
seal
around service cables where they enter meter boxes, or pass through
walls?

For service cables, I use a weather head, bend the wires down prior to
entering the weather head (drip line), and don't use anything to seal
the holes.

For wires entering through the wall of a building, I route the wire
down, then back up (drip line), then use regular caulk.

I've seen "Diversigum" used. At least, when I did HVAC
installs, that's what we used. The boss used to call it
"thumb gum".

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


wrote in message
...
What is the technical term for the putty that electricians
use to seal
around service cables where they enter meter boxes, or pass
through
walls?

"Stormin Mormon" wrote in message
...
I've seen "Diversigum" used. At least, when I did HVAC
installs, that's what we used. The boss used to call it
"thumb gum".

When I used to work in my fathers auto-body repair shop in the 1950s, a
lifetime ago, we used a similar sealant to plug holes where wires and pipes
went through the body. In those days it was called "dum-dum", it sounds
similar.

Whatever happened to the old term "monkey s__t" ?

On 4/6/2016 5:50 PM, wrote:
Whatever happened to the old term "monkey s__t" ?


Got replaced by thumb gum?

--
..
Christopher A. Young
learn more about Jesus
.. www.lds.org
..
..

On Wednesday, April 6, 2016 at 4:50:48 PM UTC-5, wrote:
Whatever happened to the old term "monkey s__t" ?

Now it's "LGBT Poop" in order to include ALL the monkeys. I always called it by what was on the label,"Duct Seal". ^_^

[8~{} Uncle Seal Monster

"Uncle Monster" wrote in message
...
On Wednesday, April 6, 2016 at 4:50:48 PM UTC-5,
wrote:
Whatever happened to the old term "monkey s__t" ?

Now it's "LGBT Poop" in order to include ALL the monkeys. I always called
it by what was on the label,"Duct Seal". ^_^

In the 1950s auto repair industry it was known as "dum-dum".

On Wed, 6 Apr 2016 14:50:41 -0700 (PDT),
wrote:

Whatever happened to the old term "monkey s__t" ?

The same thing that happened to "ni**er rig" and "pollack threads", we
evolved.

On 4/6/2016 7:49 PM, wrote:
On Wed, 6 Apr 2016 14:50:41 -0700 (PDT),
wrote:

Whatever happened to the old term "monkey s__t" ?

The same thing that happened to "ni**er rig" and "pollack threads", we
evolved.


Anyone old enough to remember Jerry
built?

In any case, that's good enough for
government work.

--
..
Christopher A. Young
learn more about Jesus
.. www.lds.org
..
..

wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

Great Stuff seems to work.

Sunlight UV makes it brittle after a few years. But, it does
provide some sealing.

Now, for the OP question. What is that putty?

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"HeyBub" wrote in message
m...
wrote:
What is the technical term for the putty that electricians
use to seal
around service cables where they enter meter boxes, or
pass through
walls?

Great Stuff seems to work.

On 10/13/2011 10:27 AM, Stormin Mormon wrote:
Sunlight UV makes it brittle after a few years. But, it does
provide some sealing.

Now, for the OP question. What is that putty?


At work, the red stuff they use going through walls is described as fire
stop. Never stuck my fingers in it, since it is up so high, but I always
assumed it dried hard, like drywall mud.

Or am I talking about something different?

--
aem sends...

On 10/13/2011 10:20 AM, HeyBub wrote:
wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

Great Stuff seems to work.



And who said you never give helpful answers?

Likely you have never even tried it because great stuff isn't UV
resistant so it quickly turns yellow and gets brittle. Other than that
it looks great on those infomercials.

On the other hand the stuff (duct seal) electricians use is easily
applied with your fingers without any mess and stays pliable for a long
time.

George wrote:
On 10/13/2011 10:20 AM, HeyBub wrote:
wrote:
What is the technical term for the putty that electricians use to
seal around service cables where they enter meter boxes, or pass
through walls?

Great Stuff seems to work.



And who said you never give helpful answers?

Likely you have never even tried it because great stuff isn't UV
resistant so it quickly turns yellow and gets brittle. Other than that
it looks great on those infomercials.


I have tried it. Six years ago to fill the voids around a new circuit
breaker box. It's still there.

In the event it does turn brittle decades from now, who cares? Bricks are
brittle. As long as bricks, or Great Stuff, are not under shear stress,
brittleness is irrelevant.

On 10/13/2011 4:42 PM, HeyBub wrote:
George wrote:
On 10/13/2011 10:20 AM, HeyBub wrote:
wrote:
What is the technical term for the putty that electricians use to
seal around service cables where they enter meter boxes, or pass
through walls?

Great Stuff seems to work.



And who said you never give helpful answers?

Likely you have never even tried it because great stuff isn't UV
resistant so it quickly turns yellow and gets brittle. Other than that
it looks great on those infomercials.


I have tried it. Six years ago to fill the voids around a new circuit
breaker box. It's still there.

In the event it does turn brittle decades from now, who cares? Bricks are
brittle. As long as bricks, or Great Stuff, are not under shear stress,
brittleness is irrelevant.


Absolutely relevant for the application. There is a really valid reason
why certain methods become standard methods.

George wrote:
On 10/13/2011 4:42 PM, HeyBub wrote:
George wrote:
On 10/13/2011 10:20 AM, HeyBub wrote:
wrote:
What is the technical term for the putty that electricians use to
seal around service cables where they enter meter boxes, or pass
through walls?

Great Stuff seems to work.



And who said you never give helpful answers?

Likely you have never even tried it because great stuff isn't UV
resistant so it quickly turns yellow and gets brittle. Other than
that it looks great on those infomercials.


I have tried it. Six years ago to fill the voids around a new circuit
breaker box. It's still there.

In the event it does turn brittle decades from now, who cares?
Bricks are brittle. As long as bricks, or Great Stuff, are not under
shear stress, brittleness is irrelevant.


Absolutely relevant for the application. There is a really valid
reason why certain methods become standard methods.

Oh, I mostly agree with conventional wisdom. So what is the "standard"
method in the instant case?

What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?


*Duct Seal

On Oct 13, 12:16*pm, "John Grabowski" wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

*Duct Seal

It's Duct Seal, or as manufacturers call it, thumbgrade.

We use it only to seal conduits going into hazardous areas. It will
prevent a dust explosion from propagating through conduit, at least in
theory.

They sell it in all the big box home improvement stores, BUT the
actual purchasers are a very specialized group.

The only people who buy much duct seal are airgun shooters. Duct Seal
makes an ideal pellet trap, just fill a flat box with it. It absorbs
a pellet silently and traps all lead dust. Every once in a while (few
thousand rounds) you dig out the pellets and smooth out the duct seal
again.

Long ago I talked with an old timer at Johns-Mansville or whatever
they were at the time who used to make the stuff. It's basically
calcium oxide and grease, made in a big pug mixer in batches of about
1000 pounds at a time. Of course he wouldn't tell me the real
recipe.

On 10/13/2011 11:27 AM, TimR wrote:
On Oct 13, 12:16 pm, "John wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

*Duct Seal

It's Duct Seal, or as manufacturers call it, thumbgrade.

I have never heard it called anything but "duct seal", but lots of
products have different names in different areas. The last box I bought
was labeled "Duct Seal" (Panduit).

Where a conduit or sleeve goes between areas of different temperature
where "condensation is known to be a problem" an _"approved material"_
is required to seal around the wires or cables (300.7-A). The seal
prevents warm moist air from circulating to the cold area. Around here,
inside the service conduit into a building is always sealed. There are
other places where it is appropriate.

"Fire stop" is to maintain the fire rating of a wall or floor, but
should work.


We use it only to seal conduits going into hazardous areas. It will
prevent a dust explosion from propagating through conduit, at least in
theory.

Can't imagine protection to a hazardous area wouldn't require a seal-off
fitting with appropriate seal material. Can't imagine duct seal being
used as a hazardous seal.

--
bud--

On Thu, 13 Oct 2011 05:08:36 -0700 (PDT),
wrote:

What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?
Ducseal is one brand - often called DUMDUM. It if fireproof. I think
the original stuff had asbestos in it - not sur what is in it now.

On Oct 13, 9:11*pm, wrote:
On Thu, 13 Oct 2011 05:08:36 -0700 (PDT),
wrote:

What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

* Ducseal is one brand - often called DUMDUM. It if fireproof. I think
the original stuff had asbestos in it - not sur what is in it now.

Very fireproof. We used it around cadweld mold holes to contain the
liquid copper when connecting copper cables to ground rods.

There is also some stuff called "Coax Seal," available as strips in
small quantities used by ham radio operators to seal coaxial fittings
out-of-doors. It is really sticky and never seems to harden. You need
something like lacquer thinner to get it off! Any good ham radio
supply house, or by mail order. Good for small jobs.

/paul W3FIS

On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

Duct seal


John Grabowski
www.MrElectrician.TV

On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
Helpful thread. Thanks all! Never knew the official name of this very useful stuff!

On 9/14/2016 1:19 PM, wrote:
On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
Helpful thread. Thanks all! Never knew the official name of this very useful stuff!



hmm. I still don't.

On Wed, 14 Sep 2016 13:29:46 -0700, Taxed and Spent
wrote:

On 9/14/2016 1:19 PM, wrote:
On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
Helpful thread. Thanks all! Never knew the official name of this very useful stuff!



hmm. I still don't.
DuctSeal

On 09/14/2016 02:29 PM, Taxed and Spent wrote:
On 9/14/2016 1:19 PM, wrote:
On Thursday, October 13, 2011 at 8:08:36 AM UTC-4,
wrote:
Helpful thread. Thanks all! Never knew the official name of this very
useful stuff!



hmm. I still don't.

Monkey ****.

On Wednesday, September 14, 2016 at 10:06:58 PM UTC-5, rbowman wrote:
On 09/14/2016 02:29 PM, Taxed and Spent wrote:
On 9/14/2016 1:19 PM, wrote:
On Thursday, October 13, 2011 at 8:08:36 AM UTC-4,
wrote:
Helpful thread. Thanks all! Never knew the official name of this very
useful stuff!

hmm. I still don't.

Monkey ****.

A lot of people call it elephant dung. I just call it by the name on the wrapper,"Duct Seal". Wouldn't it be fun to buy a lot of it, put a new wrapper on it that actually read,"Monkey ****"? I could be a popular gag gift for contractors and mechanics. \(—¦'Œ£'—¦)/

[8~{} Uncle Monkey Monster

On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

I was always told 30 + years ago it was called Monkey ****.

On Wed, 25 Oct 2017 11:09:51 -0700 (PDT), wrote:

On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

I was always told 30 + years ago it was called Monkey ****.

The counter guy probably knows that term but the real name is duct
seal.

On 10/25/2017 2:09 PM, wrote:
On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?
I was always told 30 + years ago it was called Monkey ****.

Isn't that racist?

On Tuesday, November 14, 2017 at 3:48:23 PM UTC-6, Lou Rothballer wrote:
On 10/25/2017 2:09 PM, wrote:
On Thursday, October 13, 2011 at 8:08:36 AM UTC-4, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?
I was always told 30 + years ago it was called Monkey ****.

Isn't that racist?

Not if it came out of a White monkey. ヽ(ヅ)ノ

[8~{} Uncle Ape Monster

replying to mkirsch1, Rosyann wrote:
My uncle Ezra, an electrician all his adult life, used a grey putty for every
little hole with wire coming through on every 2x4 he drilled in my parents
1967 rancher. There are NO centipedes, spiders or any other bug coming up from
the basement because he did this that way. I own the house now and I am
grateful for his attentiveness to this detail! My indoor cats patrol the
basement on occasion, and believe me , they find all types of insects that
would like to live upstairs with us. RIP Uncle Ezra.

--
for full context, visit https://www.homeownershub.com/mainte...tc-666123-.htm

On Thursday, October 13, 2011 at 5:08:36 AM UTC-7, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

https://www.homedepot.com/p/Gardner-...-110/100212441

On 4/14/20 4:43 PM, wrote:
On Thursday, October 13, 2011 at 5:08:36 AM UTC-7, wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

https://www.homedepot.com/p/Gardner-...-110/100212441



LOL


Posted nine years ago

On 04/15/2020 01:56 PM, philo wrote:
On 4/14/20 4:43 PM, wrote:
On Thursday, October 13, 2011 at 5:08:36 AM UTC-7,
wrote:
What is the technical term for the putty that electricians use to seal
around service cables where they enter meter boxes, or pass through
walls?

https://www.homedepot.com/p/Gardner-...-110/100212441




LOL


Posted nine years ago

Monkey **** doesn't have a shelf life...