Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Not 1/4 Round?
Just back from buying some 3/4" quarter-round (well, 95/128" or
whatever) . It isn't a quarter circle profile, though. The right angle part (the middle of the circle) has been machined off. Didn't check every species in the yard, but the pine, maple and faux-mahogany were all like this. Checked a piece of 1/2" and it was a full 1/4 circle profile. Not a big deal except at doorways. I usually just do a little angle cut, but if you don't do a proper return with this stuff, you can see a little notch at the end of the run. Any idea why the corner gets trimmed off? Seems like an extra step in the production process. Thanks. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Musing about wood going round and round. Where it stops nobodyknows! | Woodturning | |||
can a small round table expand to large round dining table exist? | Woodworking | |||
Which way round ... | UK diy | |||
does a round table that expands to a larger round table exist? | Woodworking | |||
Which way round ... | UK diy |