I plan on adding a dedicated 20A GFIC outlet above my kitchen
countertop, fed from a new 20A circuit breaker via 12-2 w/ground Romex
run through my attic and down inside the wall to the outlet. Two
questions:

1. Since it will be a dedicated circuit (only the one outlet on it)
does the electrical code require a junction box between the breaker
and the outlet?

2. Since the outlet will be the end of the line, is it necessary to
use wire caps and jumpers for the hot and neutral in the outlet box,
or can I simply run them straight to the outlet terminals? I've seen
the connections drawn both ways in reference books. They all show the
wire cap and jumper to a screw for the ground wire, but differ as to
the need for wire caps and jumpers for the other two wires.

Josh wrote:
I plan on adding a dedicated 20A GFIC outlet above my kitchen
countertop, fed from a new 20A circuit breaker via 12-2 w/ground Romex
run through my attic and down inside the wall to the outlet. Two
questions:

1. Since it will be a dedicated circuit (only the one outlet on it)
does the electrical code require a junction box between the breaker
and the outlet?

2. Since the outlet will be the end of the line, is it necessary to
use wire caps and jumpers for the hot and neutral in the outlet box,
or can I simply run them straight to the outlet terminals? I've seen
the connections drawn both ways in reference books. They all show the
wire cap and jumper to a screw for the ground wire, but differ as to
the need for wire caps and jumpers for the other two wires.

Hi,
What is wire cap and jumper? You mean pig tails?

Hi,
What is wire cap and jumper? You mean pig tails?- Hide quoted text -


Yes, sorry......meant to say pig tails. Are they required for end of
circuit?

Josh wrote:

Hi,
What is wire cap and jumper? You mean pig tails?- Hide quoted text -


Yes, sorry......meant to say pig tails. Are they required for end of
circuit?

Hi,
Our kitchen has a sub panel serving it. Any how you just run end to end
straight from panel breaker to the outlet. No junction box or pig tails
needed.

"Josh" wrote in message
...
I plan on adding a dedicated 20A GFIC outlet above my kitchen
countertop, fed from a new 20A circuit breaker via 12-2 w/ground Romex
run through my attic and down inside the wall to the outlet. Two
questions:

1. Since it will be a dedicated circuit (only the one outlet on it)
does the electrical code require a junction box between the breaker
and the outlet?

2. Since the outlet will be the end of the line, is it necessary to
use wire caps and jumpers for the hot and neutral in the outlet box,
or can I simply run them straight to the outlet terminals? I've seen
the connections drawn both ways in reference books. They all show the
wire cap and jumper to a screw for the ground wire, but differ as to
the need for wire caps and jumpers for the other two wires.



No junction box is required, except for the box that the receptacle will be
in. No wire nuts required at the receptacle unless the unit you're using has
pigtails on it, instead of screw or clamp terminals

On 6/30/2010 10:43 PM spake thus:

On Wed, 30 Jun 2010 21:55:49 -0700 (PDT), Josh
wrote:

I plan on adding a dedicated 20A GFIC outlet above my kitchen
countertop, fed from a new 20A circuit breaker via 12-2 w/ground
Romex run through my attic and down inside the wall to the outlet.
Two questions:

1. Since it will be a dedicated circuit (only the one outlet on it)
does the electrical code require a junction box between the
breaker and the outlet?

2. Since the outlet will be the end of the line, is it necessary to
use wire caps and jumpers for the hot and neutral in the outlet
box, or can I simply run them straight to the outlet terminals?
I've seen the connections drawn both ways in reference books. They
all show the wire cap and jumper to a screw for the ground wire,
but differ as to the need for wire caps and jumpers for the other
two wires.

No and no.
You can run a cable, unbroken all the way.

What he[1] said.

Just to clear up the confusion, the reason you see pigtails (jumpers)
and wire nuts used in wiring guides is that they're very useful when you
have cables both entering and exiting an outlet box, making for a lot of
extra connections. Obviously, if you only have a single cable and a
single device (GFCI outlet), you can simply wire the cable to the device.


[1] I'm ASSuming that gfretwell is a he.


--
The fashion in killing has an insouciant, flirty style this spring,
with the flaunting of well-defined muscle, wrapped in flags.

- Comment from an article on Antiwar.com (http://antiwar.com)