Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
I want to remove a single metal box from the wall of my hallway. There
was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? |
#2
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 16, 9:48*am, theparty wrote:
I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? If you can't get a reciprocating saw to cut the nails off without damage, you may be able to center punch the nail heads and then carefully drill the heads of the nails off. Good luck, and take your time. |
#3
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 16, 9:57*am, mike wrote:
If you can't get a reciprocating saw to cut the nails off without damage, you may be able to center punch the nail heads and then carefully drill the heads of the nails off. Good luck, and take your time. Oh, and grinding the nail heads off with a small bit is another option, assuming you have access to the heads. |
#4
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
theparty wrote:
I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? You already have a hole to repair, what's the difference it it's a couple inches bigger? I presume "moving the wires and connections" means there will be no hidden connections left behind this existing wall... -- |
#5
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 16, 12:48*pm, theparty wrote:
I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? I've been able to demo boxes like this by (carefully) taking a small pry bar and BFH and taking the box apart inside the wall (generally those boxes are designed to be ganged, so they are made of several pieces. Sometimes the screws are even available from inside the box.) then removing the nails. I've had to do this at least twice in my house - once to remove a loose box and once because I was replacing a regular switch with a 3-way and needed to fish a new cable, and couldn't get through a fire stop without removing the box. In both instances I used an old work box in the same location, although since you're patching you don't even need to be so careful. good luck nate |
#6
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
I want to remove a single metal box from the wall of my hallway. There
was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? *I usually use a big screwdriver and wedge it between the box and the wood stud. Just apply a little force and rock the screwdriver forth and back. You should move the screwdriver, as the space opens up, closer to the point where each nail enters the wood. Sometimes I use my lineman's or my Knipex diagonals to cut the nails. Take your time and be careful to not damage the wires. If this is a wood lath and plaster wall it will be difficult to not cause damage to the plaster. |
#7
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
"theparty" wrote in message ... I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? Leave the box where it is. The box is below the surface of the plaster. Screw in a block of wood with some lath screen on the face and use this as support for your patch. Plan B would be to face the block with a chunk of sheetrock and use drywall compound for the patch material. The real easy way would just be to install a blank plate over the box and leave it, it is in a hallway and people do not spend a lot of time staring at walls in hallways. -- Roger Shoaf If knowledge is power, and power corrupts, what does this say about the Congress? |
#8
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
theparty wrote:
I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? Nobody else said it, so I will- why bother moving the wires, if you are using a pull chain? The existing switch is probably just a switch leg, and you can pull it out of the box in the attic when you change the fixture. Then just pull out the old box and abandon the wire in place. Even if the light is powered through the switch, you can just put the new junction box in the attic. No need to disturb the closet wall at all. -- aem sends... |
#9
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Fri, 16 Oct 2009 09:48:15 -0700 (PDT), theparty
wrote: I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? I like to use a hacksaw blade. To nake it a little more comfortable, fashion a duct-tape handle on one end. More important, make sure all wire connections are inside an electrical box. |
#10
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 17, 4:59�pm, Phisherman wrote:
On Fri, 16 Oct 2009 09:48:15 -0700 (PDT), theparty wrote: I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? I like to use a hacksaw blade. �To nake it a little more comfortable, fashion a duct-tape handle on one end. � More important, make sure all wire connections are inside an electrical box. A ppull chain can be a hazard unless its reachable before your in the attic. |
#11
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 17, 4:59*pm, Phisherman wrote:
I like to use a hacksaw blade. *To nake it a little more comfortable, fashion a duct-tape handle on one end. * More important, make sure all wire connections are inside an electrical box. Thanks - you just reminded me that I need to buy a new jab saw hacksaw blade holder. Damn cheap plastic thing must have been fifteen years old....okay, maybe it wasn't so cheap, and I'm sorry about the damn thing, too! R |
#12
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
RicodJour wrote:
On Oct 17, 4:59 pm, Phisherman wrote: I like to use a hacksaw blade. To nake it a little more comfortable, fashion a duct-tape handle on one end. More important, make sure all wire connections are inside an electrical box. Thanks - you just reminded me that I need to buy a new jab saw hacksaw blade holder. Damn cheap plastic thing must have been fifteen years old....okay, maybe it wasn't so cheap, and I'm sorry about the damn thing, too! I think you are talking about the tool I was going to mention, didn't know what it's name was. It's a handle to hold a hacksaw blade with the blade sticking out front. No duct tape needed. I keep one in the van toolbox and one in the garage toolbox. |
#13
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 18, 1:05*am, Tony wrote:
RicodJour wrote: On Oct 17, 4:59 pm, Phisherman wrote: I like to use a hacksaw blade. *To nake it a little more comfortable, fashion a duct-tape handle on one end. * More important, make sure all wire connections are inside an electrical box. Thanks - you just reminded me that I need to buy a new jab saw hacksaw blade holder. *Damn cheap plastic thing must have been fifteen years old....okay, maybe it wasn't so cheap, and I'm sorry about the damn thing, too! I think you are talking about the tool I was going to mention, didn't know what it's name was. *It's a handle to hold a hacksaw blade with the blade sticking out front. *No duct tape needed. *I keep one in the van toolbox and one in the garage toolbox. Mine broke, you have two. That's not right. Send me one and I'll forget your greediness. Deal? R |
#14
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
On Oct 18, 4:04*am, RicodJour wrote:
On Oct 18, 1:05*am, Tony wrote: RicodJour wrote: On Oct 17, 4:59 pm, Phisherman wrote: I like to use a hacksaw blade. *To nake it a little more comfortable, fashion a duct-tape handle on one end. * More important, make sure all wire connections are inside an electrical box. Thanks - you just reminded me that I need to buy a new jab saw hacksaw blade holder. *Damn cheap plastic thing must have been fifteen years old....okay, maybe it wasn't so cheap, and I'm sorry about the damn thing, too! I think you are talking about the tool I was going to mention, didn't know what it's name was. *It's a handle to hold a hacksaw blade with the blade sticking out front. *No duct tape needed. *I keep one in the van toolbox and one in the garage toolbox. Mine broke, you have two. *That's not right. *Send me one and I'll forget your greediness. *Deal? * R- Hide quoted text - - Show quoted text - You can easy make a handle for a hacksaw blade, (slot in a piece of wood and a bolt and nut) and even use a broken off blade if too deep a cut is a problem! |
#15
Posted to alt.home.repair
|
|||
|
|||
Remove old abandoned metal elec box
theparty wrote:
I want to remove a single metal box from the wall of my hallway. There was a switch there that operated the light in the attic, it was higher up on the wall and unsightly. I am moving the wires and connections to another box on the other side of the walll (in a closet, with a blank cover), and putting a light with pull chain in the attic. I want to do as little damge to the wall as posible, then I'll repair the opening with wood and plaster. It looks like the box is nailed to a stud with two nails visible going through the box. What's the correct procedure? sawzall in between the box and the stud. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to remove metal door frames | Home Repair | |||
not quite OT, and almost metal related - best goop to remove carbon deposits | Metalworking | |||
how can I remove this metal piece (based on picture) | Home Repair | |||
An abandoned car - what to do? | Home Repair | |||
those metal plates that cover windows and doors in abandoned houses | UK diy |