I've got a grayco airless sprayer, the 900 series magnum, and it seems
to not spray right. I've tried a couple of new tips, and had the
pressure from low to high. What i'm getting is a good spray pattern the
width it should be, but then a gap and a stripe on each side of the
pattern. I'm at my wits end, i've had close to a hundred gallons of
different brands of paint through this thing in the year and a half i've
had it and it worked great until the last 25 gallons or so. I'm
beginning to wonder if there's anyway the nozzle itself (where the tip
goes in) could affect the pattern.

thanks

steve