Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,431
Default CFLs vs incandescent "max wattage" cautions in overhead fixtures....

In article m, David
Nebenzahl wrote:
On 1/19/2009 6:21 PM Nate Nagel spake thus:

wrote:

On Mon, 19 Jan 2009 19:57:12 -0600, CJT wrote:

Nate Nagel wrote:

wrote:

On Mon, 19 Jan 2009 19:23:56 -0600, AZ Nomad
wrote:

On Mon, 19 Jan 2009 15:59:38 -0500,

wrote:

Correct you are, but what happens to a fixture that is rated for a 100
watt incandescent bulb when you use it for something other than
lighting? Are you saying that as long as you don't develop 100 watts
of heat then the fixture will be just fine?

Yes, so long as you aren't actually drawing more than 100W.

I think perhaps his point is how the power factor can affect the current
vs watt relationship.

My point is that a light fixture rated for a 100 watt incandescent
only has to be robust enough to support the current of that same bulb.
1 amp.


yes, we've covered that already.

Can you find an example of a CFL that draws more than 100 watts? What
point are you trying to make, anyway?


Even if they existed, it wouldn't matter: the electrical parts of any
lamp socket are perfectly capable of handling far more than 100 watts (1
amp at 120 volts, nominal). A typical socket rating is 660 watts (at
least for ceramic sockets, maybe somewhat less for phenolic resin).


I seem to think that many are rated only 250-300 watts.

The problem is not excessive current (or power, if you prefer): it's heat.


- Don Klipstein )
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 3,469
Default CFLs vs incandescent "max wattage" cautions in overhead fixtures....

On 1/20/2009 3:29 PM Don Klipstein spake thus:

In article m, David
Nebenzahl wrote:

On 1/19/2009 6:21 PM Nate Nagel spake thus:

Can you find an example of a CFL that draws more than 100 watts? What
point are you trying to make, anyway?


Even if they existed, it wouldn't matter: the electrical parts of any
lamp socket are perfectly capable of handling far more than 100 watts (1
amp at 120 volts, nominal). A typical socket rating is 660 watts (at
least for ceramic sockets, maybe somewhat less for phenolic resin).


I seem to think that many are rated only 250-300 watts.


That sounds right; still 2.5x-3x the rating for a 100 watt light, plenty
of "headroom".


--
"I know I will go to hell, because I pardoned Richard Nixon."

- Former President Gerald Ford to his golf partners, as related by
the late Hunter S. Thompson
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
For women who desire the traditional 12-marker dials, the "Faceto,""Juro" and "Rilati" all add a little more functionality, without sacrificingthe diamonds. [email protected] Woodworking 0 April 19th 08 11:12 AM
(Lighting) Supplier of R63 reflector CFLs but "100W equivalent"? Adam Funk UK diy 5 September 17th 07 12:27 PM
Overhead Door "Phantom" Drives any good? DesignGuy Home Repair 4 December 28th 06 04:59 AM
Orange Peel Texture? "Knockdown" or "Skip Trowel" also "California Knock-down" HotRod Home Repair 6 September 28th 06 01:48 PM


All times are GMT +1. The time now is 04:51 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"