Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Cutting Stucco/metal flange on a sliding door.
Hiya Folks,
I'm getting ready to remove an existing metal sliding glass door and replacing it with patio doors. I have stucco sitting on top of the sliding door flange (exterior). I was planning to cut through the stucco and through the metal flange to minimize damage to the stucco. I have both a grinder and circular saw. What sort of grinding wheel or saw blade would you recommend for this? I could use a masonry to cut the stucco then come back with a metal cutting blade/disc but was hoping there was one blade/disc that would do both of them in one shot. Thanks for any inputs. cc |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Transition from Engineered Wood Floor to Sliding Door w/Metal Sill | Home Repair | |||
Cutting through a stucco wall? | Home Repair | |||
Attic vent - Cutting large rectangular hole in stucco | Home Repair | |||
Cutting a Metal Entry Door | Home Repair | |||
Cutting off thin flange under a stainless sink? | Metalworking |