Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Antenna Rotor expert needed
My TV antenna is (or I should say was) controlled by an Alliance U110
antenna rotor. My wonderful brother knocked the control head off of its shelf and all the wires to the motor came off. The terminals are labeled 1,2,3,4 and the wires are red, green, white, black, hence the problem. WHich wire goes to which terminal. here is a link to the instruction manual with schematic. IS there any way using an ohmmeter to identify at least one wire? Is it safe to try all 24 different combinations without blowing something up? The wires on the motor end are not visible from the ground (its 40 ft up) and its not feasable to pull the antenna down without 30 people to help. (Did I say Pizza party?) Theres a lesson here....record wire information and put it in a safe spot....no thats not it...Dont let let your freakin brother near your stuff!!! yeah...thats it. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RCA expert help needed -CTC177 chassis | Electronics Repair | |||
Metal Plating Expert Needed | Metalworking | |||
TV antenna rotor box not working | Electronics Repair | |||
Phone expert needed | UK diy | |||
Potterton Expert needed | UK diy |