Hi,

I have a hollow core door in the bedroom and it's just not quiet enough
sometimes. I mean nosie from other rooms can be heard in the bedroom.

How much better would a solid door block sound?

Thanks

jason

on 9/19/2007 9:43 PM Jason said the following:
Hi,

I have a hollow core door in the bedroom and it's just not quiet enough
sometimes. I mean nosie from other rooms can be heard in the bedroom.

How much better would a solid door block sound?

Thanks

jason

Much better. If you are talking about the plain luan mahogany doors,
even the molded panel doors are better.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

willshak wrote in
:

on 9/19/2007 9:43 PM Jason said the following:
Hi,

I have a hollow core door in the bedroom and it's just not quiet
enough sometimes. I mean nosie from other rooms can be heard in the
bedroom.

How much better would a solid door block sound?

Thanks

jason

Much better. If you are talking about the plain luan mahogany doors,
even the molded panel doors are better.


Thanks, any particular doors better at this?

jason

What doors block high frequiences , wood type, door type ??




On Fri, 21 Sep 2007 04:34:03 GMT, Jason wrote:

willshak wrote in
:

on 9/19/2007 9:43 PM Jason said the following:
Hi,

I have a hollow core door in the bedroom and it's just not quiet
enough sometimes. I mean nosie from other rooms can be heard in the
bedroom.

How much better would a solid door block sound?

Thanks

jason

Much better. If you are talking about the plain luan mahogany doors,
even the molded panel doors are better.


Thanks, any particular doors better at this?

jason

Water sports wrote in message
...

What doors block high frequiences , wood type, door type ??

Probably hollow doors filled with fibreglass or something
similar, shreds of varying lengths. The specifications of
what you want are those opposite to specs for a loudspeaker
diaphragm, i.e. non-rigid, to absorb sound rather than pass
it on, etc.

--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)

on 9/19/2007 9:43 PM Jason said the following:
I have a hollow core door in the bedroom and it's just not quiet
enough sometimes. I mean nosie from other rooms can be heard in the
bedroom.
How much better would a solid door block sound?
jason

Much better. If you are talking about the plain luan mahogany doors,
even the molded panel doors are better.

Thanks, any particular doors better at this?
jason

You'd probably be better off hanging some sound-absorbing material on
the outer surface of the door.

The hollow core door is probably reverberating the sound waves. A
molded panel door or a solid core door would probably be better than
what you have. But, the door skin of either type (the molded/textured
or solid core) will still be a relatively flat surface the sound waves
will hit and transfer the noise to the bedroom on the other side.

Although I'm not an expert on this topic, I think you'd be better off
by utilizing some sort of material that absorbs sound being affixed to
the outer door skin.

Try hanging anything on the outer face of the door before replacing
the door you have. Simply hang a sheet - folded to produce numerous
layers of material - from the top of the door. Or, place one or more
coat hooks on the outer side of the door and hang jackets, flannel
shirts, or housecoats from it.

It would probably help to hang the material a small distance from the
door surface to further reduce transmission of the sound waves from
the hung material to the door skin. Use a curtain rod, a wooden dowel,
or whatever else is suitable to drape the material over and allow an
air gap between the material and the door skin.

Clothes hooks typically hold garments several inches from the door
skin. That will be beneficial in reducing noise intrusion into the
bedroom.

If you can't, or don't want to, screw anything to the door, buy the
type of clothes hooks that slip over the top of doors and hang
something from that/them. Here some types I found online:

http://www.stacksandstacks.com/image/35331.jpg

http://www.householdgoods.com/images...or-hooksml.jpg

http://a248.e.akamai.net/f/248/38435...s-282329zz.jpg
shorter alternate link - http://shorterlink.org/3314

You could use a door-mounted shoe rack like this, or modify it to hold
other items, which will absorb the sound waves hitting the door -
http://images.skymall.com/images/pro.../93999262d.jpg

See the following Google search results webpage for more varieties -
http://www.google.com/products?q=over+door+clothes+hook




--
Stuff Up the Cracks

25th Century Quaker wrote in
:

on 9/19/2007 9:43 PM Jason said the following:
I have a hollow core door in the bedroom and it's just not quiet
enough sometimes. I mean nosie from other rooms can be heard in
the bedroom.
How much better would a solid door block sound?
jason

Much better. If you are talking about the plain luan mahogany
doors, even the molded panel doors are better.

Thanks, any particular doors better at this?
jason

You'd probably be better off hanging some sound-absorbing material on
the outer surface of the door.

The hollow core door is probably reverberating the sound waves. A
molded panel door or a solid core door would probably be better than
what you have. But, the door skin of either type (the molded/textured
or solid core) will still be a relatively flat surface the sound waves
will hit and transfer the noise to the bedroom on the other side.

Although I'm not an expert on this topic, I think you'd be better off
by utilizing some sort of material that absorbs sound being affixed to
the outer door skin.

Try hanging anything on the outer face of the door before replacing
the door you have. Simply hang a sheet - folded to produce numerous
layers of material - from the top of the door. Or, place one or more
coat hooks on the outer side of the door and hang jackets, flannel
shirts, or housecoats from it.

It would probably help to hang the material a small distance from the
door surface to further reduce transmission of the sound waves from
the hung material to the door skin. Use a curtain rod, a wooden dowel,
or whatever else is suitable to drape the material over and allow an
air gap between the material and the door skin.

Clothes hooks typically hold garments several inches from the door
skin. That will be beneficial in reducing noise intrusion into the
bedroom.

If you can't, or don't want to, screw anything to the door, buy the
type of clothes hooks that slip over the top of doors and hang
something from that/them. Here some types I found online:

http://www.stacksandstacks.com/image/35331.jpg

http://www.householdgoods.com/images...or-hooksml.jpg

http://a248.e.akamai.net/f/248/38435...atalog.com/ima
ges/en_US/local/products/122x/over-the-door-hooks-282329zz.jpg shorter
alternate link - http://shorterlink.org/3314

You could use a door-mounted shoe rack like this, or modify it to hold
other items, which will absorb the sound waves hitting the door -
http://images.skymall.com/images/pro.../93999262d.jpg

See the following Google search results webpage for more varieties -
http://www.google.com/products?q=over+door+clothes+hook






Thanks for the info.

On Oct 23, 10:12 pm, Jason wrote:
25th Century Quaker wrote :



on 9/19/2007 9:43 PM Jason said the following:
I have a hollow core door in the bedroom and it's just not quiet
enough sometimes. I mean nosie from other rooms can be heard in
the bedroom.
How much better would a solid door block sound?
jason

Much better. If you are talking about the plain luan mahogany
doors, even the molded panel doors are better.

Thanks, any particular doors better at this?
jason

You'd probably be better off hanging some sound-absorbing material on
the outer surface of the door.

The hollow core door is probably reverberating the sound waves. A
molded panel door or a solid core door would probably be better than
what you have. But, the door skin of either type (the molded/textured
or solid core) will still be a relatively flat surface the sound waves
will hit and transfer the noise to the bedroom on the other side.

Although I'm not an expert on this topic, I think you'd be better off
by utilizing some sort of material that absorbs sound being affixed to
the outer door skin.

Try hanging anything on the outer face of the door before replacing
the door you have. Simply hang a sheet - folded to produce numerous
layers of material - from the top of the door. Or, place one or more
coat hooks on the outer side of the door and hang jackets, flannel
shirts, or housecoats from it.

It would probably help to hang the material a small distance from the
door surface to further reduce transmission of the sound waves from
the hung material to the door skin. Use a curtain rod, a wooden dowel,
or whatever else is suitable to drape the material over and allow an
air gap between the material and the door skin.

Clothes hooks typically hold garments several inches from the door
skin. That will be beneficial in reducing noise intrusion into the
bedroom.

If you can't, or don't want to, screw anything to the door, buy the
type of clothes hooks that slip over the top of doors and hang
something from that/them. Here some types I found online:

http://www.stacksandstacks.com/image/35331.jpg

http://www.householdgoods.com/images...or-hooksml.jpg

http://a248.e.akamai.net/f/248/38435...atalog.com/ima
ges/en_US/local/products/122x/over-the-door-hooks-282329zz.jpg shorter
alternate link -http://shorterlink.org/3314

You could use a door-mounted shoe rack like this, or modify it to hold
other items, which will absorb the sound waves hitting the door -
http://images.skymall.com/images/pro.../93999262d.jpg

See the following Google search results webpage for more varieties -
http://www.google.com/products?q=over+door+clothes+hook

Thanks for the info.


Before you try any of these things do a little research on the web on
sound transmission. Generally the best defenses against sound
transmission are mass, and sealing openings. So if you have a big gap
between the door and floor, that would one area to address. To add
mass, yes get the heaviest solid door you can find, or for a quick and
dirty solution screw a sheet of drywall to the existing door. Can be
on inside or outside. -- H