Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
Hi, I have a ceiling fan that was installed by the previous-to-the-
previous owners and I need to identify it by make and model. Three of the four bulbs in the upper lighting fixture are blown and I cannot get them out. There are little trap-door like panels below each bulb, but they are too big to fit through the openings. I tried taking off the entire upper fixture but even with the blades removed, the lower light sconces get in the way and I cannot open it enough to get the bulbs out. Also, whoever mounted this fan did a lousy job and it sways (no, it's not out of balance - just mounted on a single axis that allows it to swing). So if anyone can tell me the make and model, I would be really appreciative. Thanks. http://i4.tinypic.com/67hneb8.jpg |
#2
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
On Mon, 17 Sep 2007 07:22:22 -0700, dewey wrote:
Hi, I have a ceiling fan that was installed by the previous-to-the- previous owners and I need to identify it by make and model. Three of the four bulbs in the upper lighting fixture are blown and I cannot get them out. There are little trap-door like panels below each bulb, but they are too big to fit through the openings. I tried taking off the entire upper fixture but even with the blades removed, the lower light sconces get in the way and I cannot open it enough to get the bulbs out. Also, whoever mounted this fan did a lousy job and it sways (no, it's not out of balance - just mounted on a single axis that allows it to swing). So if anyone can tell me the make and model, I would be really appreciative. Thanks. http://i4.tinypic.com/67hneb8.jpg If this helps, I just installed a Hunter fan. Instructions we 1. Install mounting plate to ceiling electrical box. 2. Attach fan base to mounting plate. 3. Attach fan blades. 4. Attach light assembly. You may have to take your fan apart opposite the way I installed mine. Once the light assembly and blades are removed, the upper cover should come off completely, I'd guess. |
#3
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
franz frippl wrote in
. net: On Mon, 17 Sep 2007 07:22:22 -0700, dewey wrote: Hi, I have a ceiling fan that was installed by the previous-to-the- previous owners and I need to identify it by make and model. Three of the four bulbs in the upper lighting fixture are blown and I cannot get them out. There are little trap-door like panels below each bulb, but they are too big to fit through the openings. I tried taking off the entire upper fixture but even with the blades removed, the lower light sconces get in the way and I cannot open it enough to get the bulbs out. Also, whoever mounted this fan did a lousy job and it sways (no, it's not out of balance - just mounted on a single axis that allows it to swing). So if anyone can tell me the make and model, I would be really appreciative. Thanks. http://i4.tinypic.com/67hneb8.jpg If this helps, I just installed a Hunter fan. Instructions we 1. Install mounting plate to ceiling electrical box. 2. Attach fan base to mounting plate. 3. Attach fan blades. 4. Attach light assembly. You may have to take your fan apart opposite the way I installed mine. Once the light assembly and blades are removed, the upper cover should come off completely, I'd guess. I think you're right. The problem is that I cannot see how to remove the lower light assembly. It is attached by an axle that goes into the upper assembly. My guess is that it probably unscrews but I don't want to force it and break it. -- Crippled but free I was blind all the time I was learning to see. |
#4
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
On Mon, 17 Sep 2007 19:44:14 +0000, theBZA wrote:
franz frippl wrote in . net: On Mon, 17 Sep 2007 07:22:22 -0700, dewey wrote: Hi, I have a ceiling fan that was installed by the previous-to-the- previous owners and I need to identify it by make and model. Three of the four bulbs in the upper lighting fixture are blown and I cannot get them out. There are little trap-door like panels below each bulb, but they are too big to fit through the openings. I tried taking off the entire upper fixture but even with the blades removed, the lower light sconces get in the way and I cannot open it enough to get the bulbs out. Also, whoever mounted this fan did a lousy job and it sways (no, it's not out of balance - just mounted on a single axis that allows it to swing). So if anyone can tell me the make and model, I would be really appreciative. Thanks. http://i4.tinypic.com/67hneb8.jpg If this helps, I just installed a Hunter fan. Instructions we 1. Install mounting plate to ceiling electrical box. 2. Attach fan base to mounting plate. 3. Attach fan blades. 4. Attach light assembly. You may have to take your fan apart opposite the way I installed mine. Once the light assembly and blades are removed, the upper cover should come off completely, I'd guess. I think you're right. The problem is that I cannot see how to remove the lower light assembly. It is attached by an axle that goes into the upper assembly. My guess is that it probably unscrews but I don't want to force it and break it. There seems to be a pull cord in the center of the light assembly. There most likely is a knurled nut which can be unscrewed. The brass cover should slip off and expose what's underneath. Once exposed, you should be able to figure out rest. |
#5
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
There seems to be a pull cord in the center of the light assembly. There most likely is a knurled nut which can be unscrewed. The brass cover should slip off and expose what's underneath. Once exposed, you should be able to figure out rest. The "lower light assembly" is usually held in by three small screws driven in the side. One you take out the screws you have to disconnect the wires for the lamps. On "newer" fans, there is a connector or two. In older fans, the connection uses wire nuts. I would advise the OP to try again to replace the bulbs via the "access ports." I have two ceiling fans with the "night lights" in the "base." In my case, I believe the "access" panels are large enough that I will be able to replace the bulbs. It would take over an hour to remove the blades and disconnect the "lower light assembly" and put things back together again. It would be almost as much as a PITA was replacing the fan altogether. The relatively cheap fans from Wally World are pretty good: quiet, nice designs, etc. If there is ANYTHING about the old fan he doesn't like (aside from the bulb changing being a PITA) he might want to replace the whole damn thing. |
#6
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
On Sep 17, 10:22 am, dewey wrote:
Hi, I have a ceiling fan that was installed by the previous-to-the- previous owners and I need to identify it by make and model. Three of the four bulbs in the upper lighting fixture are blown and I cannot get them out. There are little trap-door like panels below each bulb, but they are too big to fit through the openings. I tried taking off the entire upper fixture but even with the blades removed, the lower light sconces get in the way and I cannot open it enough to get the bulbs out. Also, whoever mounted this fan did a lousy job and it sways (no, it's not out of balance - just mounted on a single axis that allows it to swing). So if anyone can tell me the make and model, I would be really appreciative. Thanks. http://i4.tinypic.com/67hneb8.jpg I don't know how id'ing the fan will help get the bulbs out. First, it is common for bulbs to get stuck as the threads on these cheap light fixtures are not good. Second, the previous home owner put regular bulbs in, and if he had put the smaller decrotive ones, the glass "scones" ?? would be able to slide over them. To change the bulbs - put a bag over each light and break the bulb. Then remove the glass cover "scone" (never heard it called that). Get your pliers and twist out the base of the bulb. I've done this many times. Even the small bulbs can get stuck so much that you have to break the bulb. OH - turn power off at the breaker, less the wife comes in and flips the switch on you. |
#8
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
"John Gilmer" wrote in
: There seems to be a pull cord in the center of the light assembly. There most likely is a knurled nut which can be unscrewed. The brass cover should slip off and expose what's underneath. Once exposed, you should be able to figure out rest. The "lower light assembly" is usually held in by three small screws driven in the side. One you take out the screws you have to disconnect the wires for the lamps. On "newer" fans, there is a connector or two. In older fans, the connection uses wire nuts. I would advise the OP to try again to replace the bulbs via the "access ports." I have two ceiling fans with the "night lights" in the "base." In my case, I believe the "access" panels are large enough that I will be able to replace the bulbs. It would take over an hour to remove the blades and disconnect the "lower light assembly" and put things back together again. It would be almost as much as a PITA was replacing the fan altogether. The relatively cheap fans from Wally World are pretty good: quiet, nice designs, etc. If there is ANYTHING about the old fan he doesn't like (aside from the bulb changing being a PITA) he might want to replace the whole damn thing. I appreciate the advice. There is unfortunately no way I can fit the bulbs out the access panels. I've tried - I would have to break them. Of course, there are bulbs that would fit - just whoever installed the lamp didn't use them. Oh, I realize there might be some confusion. I am the OP. I originally posted using my old google (originally deja) account. I've been replying using Xnews. Sorry. -- Crippled but free I was blind all the time I was learning to see. |
#9
Posted to alt.home.repair
|
|||
|
|||
Help me ID this ceiling fan
Smitty Two wrote in
news In article . com, wrote: On Sep 17, 10:22 am, dewey wrote: Hi, I have a ceiling fan that was installed by the previous-to-the- previous owners and I need to identify it by make and model. Three of the four bulbs in the upper lighting fixture are blown and I cannot get them out. There are little trap-door like panels below each bulb, but they are too big to fit through the openings. I tried taking off the entire upper fixture but even with the blades removed, the lower light sconces get in the way and I cannot open it enough to get the bulbs out. Also, whoever mounted this fan did a lousy job and it sways (no, it's not out of balance - just mounted on a single axis that allows it to swing). So if anyone can tell me the make and model, I would be really appreciative. Thanks. http://i4.tinypic.com/67hneb8.jpg I don't know how id'ing the fan will help get the bulbs out. First, it is common for bulbs to get stuck as the threads on these cheap light fixtures are not good. Second, the previous home owner put regular bulbs in, and if he had put the smaller decrotive ones, the glass "scones" ?? would be able to slide over them. To change the bulbs - put a bag over each light and break the bulb. Then remove the glass cover "scone" (never heard it called that). Get your pliers and twist out the base of the bulb. I've done this many times. Even the small bulbs can get stuck so much that you have to break the bulb. OH - turn power off at the breaker, less the wife comes in and flips the switch on you. That's "sconce." OP, don't those sconces come off pretty readily with three thumb screws? Then you could drop the upper assembly off. I do agree with the smaller bulb idea for replacement, though, and I'd also consider breaking the bulbs you have, but it's going to be a real PITA to get the broken bits cleaned up. Yeah but the sconce holders are attached to the assembly. Someone else posted that the entire lower assembly might be removeable. There are two screws holding it to the upper on the sides adn a knurled screw around the pull chain. I am going to try this approach. I appreciate everyone's help. -- Crippled but free I was blind all the time I was learning to see. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sheetrock ceiling vs. drop ceiling tiles | Home Repair | |||
Ceiling fan- attaching the ceiling plate | Home Repair | |||
Old Ceiling Fan/Light gone with two wires coming from the ceiling | Home Repair | |||
ceiling hook in concrete ceiling | Home Repair | |||
Vaulted Ceiling--Installing Ceiling Fans | Home Repair |