Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
About 18 years ago when we built the house, we put in sprinklers
right after the final grading. So, due to settling and other reasons over the years, some of the heads even at full extension are spraying much of the water into the ground nearby and not getting full benefit. Are there any extensions of an inch or two that I could screw in or other method of bringing the heads up a little? The are the spray heads and not the big ones that popup and have the arm that makes them move around. I tried to dig them up and move them up that way, but it did not work and they settled back down where they were before. These are Rain Birds. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Installing sprinkler to an existing sprinkler system. | Home Ownership | |||
sprinkler heads sticking | Home Repair | |||
Sprinkler heads | Home Repair | |||
Heads up :( | Home Repair | |||
Hunter PGP Sprinkler Heads ?? | Home Repair |