Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
I have about a 4 to 5 feet overhang area, which is now covered with
painted wood boards. It has been there for years and recently I had to remove a bunch of them to perform repair of the framing above it and leaks in the super-gutter above has caused the boards to rot. Over 60% of the boards are damages in some way, shape or form so I am in the process of riping them all down. Here are some pics of what it looks before I took them down: http://i173.photobucket.com/albums/w...d/P1000558.jpg http://i173.photobucket.com/albums/w...d/P1000548.jpg http://i173.photobucket.com/albums/w...d/P1000547.jpg The board that is there now is still available at HD: Millstead 11/32 In. or 3/8 In. x 4 Ft. x 8 Ft. 1.6 In. Plybead Pine Siding Model 538281 http://205.196.138.20/3/78/78eff07b-...fb9a37b8_3.jpg at about $18 for a 4x8 sheet. It sort of look like a T&G wood ceiling but it does not, actually looks a little cheesy. I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. Thanks! MC |
#2
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
That same sheet also comes in white. Look at it. Might lighten the area a
bit. -- BetsyB "MiamiCuse" wrote in message oups.com... I have about a 4 to 5 feet overhang area, which is now covered with painted wood boards. It has been there for years and recently I had to remove a bunch of them to perform repair of the framing above it and leaks in the super-gutter above has caused the boards to rot. Over 60% of the boards are damages in some way, shape or form so I am in the process of riping them all down. Here are some pics of what it looks before I took them down: http://i173.photobucket.com/albums/w...d/P1000558.jpg http://i173.photobucket.com/albums/w...d/P1000548.jpg http://i173.photobucket.com/albums/w...d/P1000547.jpg The board that is there now is still available at HD: Millstead 11/32 In. or 3/8 In. x 4 Ft. x 8 Ft. 1.6 In. Plybead Pine Siding Model 538281 http://205.196.138.20/3/78/78eff07b-...fb9a37b8_3.jpg at about $18 for a 4x8 sheet. It sort of look like a T&G wood ceiling but it does not, actually looks a little cheesy. I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. Thanks! MC |
#3
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
Well, I don't think you would want to use drywall. One common solution for this
type of area is soffit panels, vinyl or aluminum, available solid or perforated. -- Dennis |
#4
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
"MiamiCuse" wrote in message I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. I'd avoid drywall as it would probably get damaged by moisture. If money was not an consideration, cypress would be great. I'd seriously look at some sort of vinyl siding material. There is a vertical style that looks like board and batten that may look good up there. |
#5
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
"Edwin Pawlowski" wrote on 16 May 2007 in group
alt.home.repair: I'd avoid drywall as it would probably get damaged by moisture. If money was not an consideration, cypress would be great. I'd seriously look at some sort of vinyl siding material. There is a vertical style that looks like board and batten that may look good up there. I'll second the nomination to NOT use drywall. I have a job next week to replace some 30-year-old soffit that was done with drywall. Squirrels gnawed through it, built a nest, and caused the drywall to fall off. On the other hand, it DID last 30 years.... |
#6
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
MiamiCuse wrote: I have about a 4 to 5 feet overhang area, which is now covered with painted wood boards. It has been there for years and recently I had to remove a bunch of them to perform repair of the framing above it and leaks in the super-gutter above has caused the boards to rot. Over 60% of the boards are damages in some way, shape or form so I am in the process of riping them all down. Here are some pics of what it looks before I took them down: http://i173.photobucket.com/albums/w...d/P1000558.jpg http://i173.photobucket.com/albums/w...d/P1000548.jpg http://i173.photobucket.com/albums/w...d/P1000547.jpg The board that is there now is still available at HD: Millstead 11/32 In. or 3/8 In. x 4 Ft. x 8 Ft. 1.6 In. Plybead Pine Siding Model 538281 http://205.196.138.20/3/78/78eff07b-...fb9a37b8_3.jpg at about $18 for a 4x8 sheet. It sort of look like a T&G wood ceiling but it does not, actually looks a little cheesy. I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. Thanks! MC Have you looked at some of the vinyl and aluminum soffit systems? That might save some $$ and eliminate the rot problem. HTH Joe |
#7
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
On May 16, 12:46 pm, MiamiCuse wrote:
I have about a 4 to 5 feet overhang area, which is now covered with painted wood boards. It has been there for years and recently I had to remove a bunch of them to perform repair of the framing above it and leaks in the super-gutter above has caused the boards to rot. Over 60% of the boards are damages in some way, shape or form so I am in the process of riping them all down. Here are some pics of what it looks before I took them down: http://i173.photobucket.com/albums/w...d/P1000547.jpg The board that is there now is still available at HD: Millstead 11/32 In. or 3/8 In. x 4 Ft. x 8 Ft. 1.6 In. Plybead Pine Siding Model 538281http://205.196.138.20/3/78/78eff07b-341b-4046-9d3a-0af7fb9a37b8_3.jpg at about $18 for a 4x8 sheet. It sort of look like a T&G wood ceiling but it does not, actually looks a little cheesy. I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. Thanks! MC Man-o-man I hope you bought that house cheap. What'd you ever do with the AC in the big room? Keep away from sheetrock. You've got too much humidity and you're asking for mold. HD has sheetrock without paper on it. That would be better because it would limit mold but you'd do better with green- board like you use in a bathroom. Then paint and add some anti-mold stuff to the paint just for good measure. Also, I find a glossier paint cleans up better and might help if any mold appears. One you've rocked it, go talk to the HD paint people about some interesting painting techniques they have. You might also vinyl side it (just kidding). Or popcorn it. If you wanted to throw some bucks at it, you could tile the whole thing. |
#8
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
MiamiCuse wrote:
I have about a 4 to 5 feet overhang area, which is now covered with painted wood boards. It has been there for years and recently I had to remove a bunch of them to perform repair of the framing above it and leaks in the super-gutter above has caused the boards to rot. Over 60% of the boards are damages in some way, shape or form so I am in the process of riping them all down. Here are some pics of what it looks before I took them down: http://i173.photobucket.com/albums/w...d/P1000558.jpg http://i173.photobucket.com/albums/w...d/P1000548.jpg http://i173.photobucket.com/albums/w...d/P1000547.jpg The board that is there now is still available at HD: Millstead 11/32 In. or 3/8 In. x 4 Ft. x 8 Ft. 1.6 In. Plybead Pine Siding Model 538281 http://205.196.138.20/3/78/78eff07b-...fb9a37b8_3.jpg at about $18 for a 4x8 sheet. It sort of look like a T&G wood ceiling but it does not, actually looks a little cheesy. I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. Thanks! MC http://www.jameshardie.com/homeowner...ardisoffit.php -- Robert Allison Rimshot, Inc. Georgetown, TX |
#9
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
"Pat" wrote in message oups.com... On May 16, 12:46 pm, MiamiCuse wrote: I have about a 4 to 5 feet overhang area, which is now covered with painted wood boards. It has been there for years and recently I had to remove a bunch of them to perform repair of the framing above it and leaks in the super-gutter above has caused the boards to rot. Over 60% of the boards are damages in some way, shape or form so I am in the process of riping them all down. Here are some pics of what it looks before I took them down: http://i173.photobucket.com/albums/w...d/P1000547.jpg The board that is there now is still available at HD: Millstead 11/32 In. or 3/8 In. x 4 Ft. x 8 Ft. 1.6 In. Plybead Pine Siding Model 538281http://205.196.138.20/3/78/78eff07b-341b-4046-9d3a-0af7fb9a37b8_3.jpg at about $18 for a 4x8 sheet. It sort of look like a T&G wood ceiling but it does not, actually looks a little cheesy. I am trying to decide what to do to replace it. Obviously one option is to use drywall, or to use the same board as before, but I would welcome any opinion/comment as to other options. I don't think I could afford a true T&G wood ceiling that is installed plank by plank. Location is Miami, FL if it makes a difference. Thanks! MC Man-o-man I hope you bought that house cheap. What'd you ever do with the AC in the big room? Keep away from sheetrock. You've got too much humidity and you're asking for mold. HD has sheetrock without paper on it. That would be better because it would limit mold but you'd do better with green- board like you use in a bathroom. Then paint and add some anti-mold stuff to the paint just for good measure. Also, I find a glossier paint cleans up better and might help if any mold appears. One you've rocked it, go talk to the HD paint people about some interesting painting techniques they have. You might also vinyl side it (just kidding). Or popcorn it. If you wanted to throw some bucks at it, you could tile the whole thing. Sheetrock outside is idiotic. If you don't like beadboard, a traditional porch ceiling, put up T&G pine in a nice pattern, or even luan plywood like a soffit. Not rocket science. Unless you pay for fancy wood, you will want to prime well and paint. Not rocket science. If you want zero maint, go for one of the plastic-clad OSB panels like they sell to skin sheds with, or hardieplank of some sort. aem sends.... |
#10
Posted to alt.home.repair
|
|||
|
|||
Suggestions on what to use for "exterior" ceiling
"Steve" wrote in message .128... "Edwin Pawlowski" wrote on 16 May 2007 in group alt.home.repair: I'd avoid drywall as it would probably get damaged by moisture. If money was not an consideration, cypress would be great. I'd seriously look at some sort of vinyl siding material. There is a vertical style that looks like board and batten that may look good up there. I'll second the nomination to NOT use drywall. I have a job next week to replace some 30-year-old soffit that was done with drywall. Squirrels gnawed through it, built a nest, and caused the drywall to fall off. On the other hand, it DID last 30 years.... I don't think sheet rock would wokrk either. I am now thinking to use the same beadboard or some T1-11 ply. Thanks, |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|