I've been wanting a single-bay carport since I moved into my Levittown-
style house. The few prefabs I can find just don't look like they'd
work - and I'd like to build something that complements the house.
Space constraints mean it will be up against the side of the building,
and a flat roof would be least visible from inside (it would be just
beneath a kitchen window) and would best suit the style I'm aiming
for. So two questions:

-The roof: what material options do I have? I'd like to go with a
quality corrugated plastic panel (which has worked fine on sheds I
built) but worry how flat I could go with it (allowing a minimal slope
for drainage), even using liberal amounts of silicone sealant at the
overlaps. I'd go with alternatives like metal or asphalt sheeting if
necessary, but I'd be unfamiliar with installation, and would miss the
light-transmitting quality of plastic (and there would still be the
drainage issue). I'm in Georgia, so snow accumulation is not a problem
(though I'll have to be diligent cleaning off tree debris).

- To keep it as open as possible, and for added stability, I'd like to
anchor one side of the roof to the side of the house (actually the
carport would stick out past the front of the house so it would just
be the back half of the roof anchored to the building, with a post at
the front corner). I'd rather not use a full ledger - if I could
connect it with a few anchor points and keep about 6 inches between
the two structures I'd avoid tree debris accumulation and wouldn't
impact the house structure as much. Any ideas how I could do this? I
doubt there's a ready-made anchor/spacer available, but what would be
easy to fabricate? I'm figuring on attaching directly into the wall
frame - it'll be a bear finding those studs through sheathing and two
layers of siding, but that's another story.

VMacek

On Apr 23, 5:55 pm, wrote:
I've been wanting a single-bay carport since I moved into my Levittown-
style house. The few prefabs I can find just don't look like they'd
work - and I'd like to build something that complements the house.
Space constraints mean it will be up against the side of the building,
and a flat roof would be least visible from inside (it would be just
beneath a kitchen window) and would best suit the style I'm aiming
for. So two questions:

-The roof: what material options do I have? I'd like to go with a
quality corrugated plastic panel (which has worked fine on sheds I
built) but worry how flat I could go with it (allowing a minimal slope
for drainage), even using liberal amounts of silicone sealant at the
overlaps. I'd go with alternatives like metal or asphalt sheeting if
necessary, but I'd be unfamiliar with installation, and would miss the
light-transmitting quality of plastic (and there would still be the
drainage issue). I'm in Georgia, so snow accumulation is not a problem
(though I'll have to be diligent cleaning off tree debris).

- To keep it as open as possible, and for added stability, I'd like to
anchor one side of the roof to the side of the house (actually the
carport would stick out past the front of the house so it would just
be the back half of the roof anchored to the building, with a post at
the front corner). I'd rather not use a full ledger - if I could
connect it with a few anchor points and keep about 6 inches between
the two structures I'd avoid tree debris accumulation and wouldn't
impact the house structure as much. Any ideas how I could do this? I
doubt there's a ready-made anchor/spacer available, but what would be
easy to fabricate? I'm figuring on attaching directly into the wall
frame - it'll be a bear finding those studs through sheathing and two
layers of siding, but that's another story.

VMacek

metal could be noisy.
see history and some house pictures at:
http://tigger.uic.edu/~pbhales/Levittown/oldindex.html

wrote in message
oups.com...
I've been wanting a single-bay carport since I moved into my Levittown-
style house. The few prefabs I can find just don't look like they'd
work - and I'd like to build something that complements the house.
Space constraints mean it will be up against the side of the building,
and a flat roof would be least visible from inside (it would be just
beneath a kitchen window) and would best suit the style I'm aiming
for. So two questions:

-The roof: what material options do I have? I'd like to go with a
quality corrugated plastic panel (which has worked fine on sheds I
built) but worry how flat I could go with it (allowing a minimal slope
for drainage), even using liberal amounts of silicone sealant at the
overlaps. I'd go with alternatives like metal or asphalt sheeting if
necessary, but I'd be unfamiliar with installation, and would miss the
light-transmitting quality of plastic (and there would still be the
drainage issue). I'm in Georgia, so snow accumulation is not a problem
(though I'll have to be diligent cleaning off tree debris).

- To keep it as open as possible, and for added stability, I'd like to
anchor one side of the roof to the side of the house (actually the
carport would stick out past the front of the house so it would just
be the back half of the roof anchored to the building, with a post at
the front corner). I'd rather not use a full ledger - if I could
connect it with a few anchor points and keep about 6 inches between
the two structures I'd avoid tree debris accumulation and wouldn't
impact the house structure as much. Any ideas how I could do this? I
doubt there's a ready-made anchor/spacer available, but what would be
easy to fabricate? I'm figuring on attaching directly into the wall
frame - it'll be a bear finding those studs through sheathing and two
layers of siding, but that's another story.

VMacek


I used to be a steel erection contractor. I've built and repaired hundreds
of carport spaces.

You should be able to find carport materials at your local steel dealer.
Google ASC Pacific and look at the panels. You use 3" or 4" posts, with Cee
or Zee purlins, then some corrugated galvanized or painted panels on top of
that. Cap with available trim. This will give you a stout carport that
will be almost maintenance free. Check with local building departments, as
an attached carport will be easier to get permitted than a freestanding one.
Almost anything constitutes attachment, and I have used a 1" piece of flat
bar ten foot long, and the inspector just looked at me, smiled, and signed
it off. (the homeowner took off the strap the next day per instructions,
but I have no knowledge of that ;-) )

Don't waste your time on plastic panels. They die in the UV of sun's rays,
and break. The poles should be about $40 each, purlins $40 each, the panels
about $40 each, and the trim pieces about $10 each, making it a grand total
of under $600. Erection extra, or you can do it yourself if you have any
skills at all.

Steve