Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair,alt.home.repair
mm mm is offline
external usenet poster
 
Posts: 7,824
Default Do the remote codes match for various universal remotes

Do the remote codes match for various universal remotes?

I have several brands of universal tv, vcr, dvd etc. remotes. For
some I have the list of codes, and for some I don't. Do they usually
have the same codes from brand to brand?

I know I could just compare two lists, or every list I have, but I
still wouldn't know about the others, and I thought someone might know
the answer right off the bat. Thanks.
  #2   Report Post  
Posted to sci.electronics.repair,alt.home.repair
external usenet poster
 
Posts: 1,245
Default Do the remote codes match for various universal remotes


"mm" wrote in message
...
Do the remote codes match for various universal remotes?

I have several brands of universal tv, vcr, dvd etc. remotes. For
some I have the list of codes, and for some I don't. Do they usually
have the same codes from brand to brand?

I know I could just compare two lists, or every list I have, but I
still wouldn't know about the others, and I thought someone might know
the answer right off the bat. Thanks.


http://www.lirc.org/

LIRC is a package that allows you to decode and send infra-red signals of
many (but not all) commonly used remote controls.

Former versions focussed on home-brew hardware connected to the serial or
parallel port. Descriptions how to build this hardware can be found here.
Current versions of LIRC also support a variety of other hardware. An
up-to-date list of all supported devices and the status of the according
drivers is available on the left.

The most important part of LIRC is the lircd daemon that will decode IR
signals received by the device drivers and provide the information on a
socket. It will also accept commands for IR signals to be sent if the
hardware supports this. The second daemon program called lircmd will connect
to lircd and translate the decoded IR signals to mouse movements. You can
e.g. configure X to use your remote control as an input device.

The user space applications will allow you to control your computer with
your remote control. You can send X events to applications, start programs
and much more on just one button press. The possible applications are
obvious: Infra-red mouse, remote control for your TV tuner card or CD-ROM,
shutdown by remote, program your VCR and/or satellite tuner with your
computer, etc. I've heard that MP3 players are also quite popular these
days.






  #3   Report Post  
Posted to sci.electronics.repair,alt.home.repair
EXT EXT is offline
external usenet poster
 
Posts: 1,661
Default Do the remote codes match for various universal remotes


"mm" wrote in message
...
Do the remote codes match for various universal remotes?

I have several brands of universal tv, vcr, dvd etc. remotes. For
some I have the list of codes, and for some I don't. Do they usually
have the same codes from brand to brand?

I know I could just compare two lists, or every list I have, but I
still wouldn't know about the others, and I thought someone might know
the answer right off the bat. Thanks.


NO they don't. Rather than asking a newsgroup why don't you go to
www.remotecentral.com to get more information. Are you talking about the
numbers you enter a pre-programmed remote so it will control a device, or
are you talking about the IR codes that are transmitted to the device in
order to control it. Neither are common between different brands.


  #4   Report Post  
Posted to sci.electronics.repair,alt.home.repair
mm mm is offline
external usenet poster
 
Posts: 7,824
Default Do the remote codes match for various universal remotes

On Sat, 17 Feb 2007 19:23:30 -0500, "EXT"
wrote:


"mm" wrote in message
.. .
Do the remote codes match for various universal remotes?

I have several brands of universal tv, vcr, dvd etc. remotes. For
some I have the list of codes, and for some I don't. Do they usually
have the same codes from brand to brand?

I know I could just compare two lists, or every list I have, but I
still wouldn't know about the others, and I thought someone might know
the answer right off the bat. Thanks.


NO they don't. Rather than asking a newsgroup why don't you go to
www.remotecentral.com to get more information. Are you talking about the
numbers you enter a pre-programmed remote so it will control a device, or


Yes, this one. I look in a chart for my brand of tv, and it gives one
or more usually three digit numbers that I enter. If I get the right
three numbers, it now works as a remote for that tv.

are you talking about the IR codes that are transmitted to the device in
order to control it.


I knew there were such codes, but wouldn't know what to do with them.
Well, after reading Homer's post, I guess I do know something to do
with them!

Neither are common between different brands.


Exactly what I wanted to know. Thank, and thanks Homer. I will get
better organized on the lists I have, and I'll keep my eyes out for
other lists if I see them.

(I didn't collect this stuff until I got a Magnavox tv at a yard sale
that ended up requiring 3 remotes to control all the functions. I
have a learning-remote, and I was going to teach all 3 sets of
commands, but a year later I got a single Magnavox remote at a hamfest
that did everything the 3 did. Now I'm interested in all this
stuff._)



If you are inclined to email me
for some reason, remove NOPSAM :-)
  #5   Report Post  
Posted to sci.electronics.repair,alt.home.repair
mm mm is offline
external usenet poster
 
Posts: 7,824
Default Do the remote codes match for various universal remotes

On Sat, 17 Feb 2007 20:36:16 -0500, RLM wrote:

On Sat, 17 Feb 2007 16:54:42 -0500, mm wrote:

Do the remote codes match for various universal remotes?

I have several brands of universal tv, vcr, dvd etc. remotes. For
some I have the list of codes, and for some I don't. Do they usually
have the same codes from brand to brand?

I know I could just compare two lists, or every list I have, but I
still wouldn't know about the others, and I thought someone might know
the answer right off the bat. Thanks.


http://www.xdiv.com/remotes/


Thanks and thanks to all.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do the remote codes match for various universal remotes mm Electronics Repair 4 February 18th 07 03:19 AM
can't get MX-500 universal remote to work with Directv H20 remote [email protected] Electronics Repair 0 December 3rd 06 09:12 AM
Universal garage door remotes? Proctologically Violated©® Home Repair 4 May 7th 06 07:22 AM
What's the scoop on universal remotes ?? moonlite Electronics Repair 7 March 25th 06 01:18 AM
Best Universal Remote? [email protected] Electronics Repair 13 January 28th 06 06:21 AM


All times are GMT +1. The time now is 07:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"