Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Galvanized round duct, can I substitute flex aluminum for part ofthe run?
I would like to shift some galvanized 6 inch round duct in a joist
space. I would like to splice in some 6 inch flex aluminum duct at each end so the duct could be shifted one way or the other for some hi-hat lights. Would doing so violate code or good practice? Thank you for any help. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Rectangular Flex Duct? | Home Repair | |||
Low airflow, replace flex duct? | Home Repair | |||
Replace flex duct with rigid duct? | Home Repair | |||
Sealing Round Metal Duct Joints On Forced Hot Air Furnace (other than duct tape)? | Home Repair | |||
short runs of flex hose vs hvac aluminum flex vs pvc pipe for DC ductwork | Woodworking |