Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 929
Default how to make sure that driveway does not crack


pe wrote:
On Sun, 07 Jan 2007 23:30:41 GMT, "George E. Cawthon"
wrote:

wrote:
On Sun, 7 Jan 2007 13:10:56 -0600, "Steve Barker"
wrote:

Rebar, lots and lots of rebar. And concrete 6" thick. Did i mention rebar?

Except lots of rebar can also mean lots of spalling. Rust requires more room than
steel and can explode the concrete.


I think you are joking. If not, the rebar should
be in the lower third of layer. How do you
explain the lack of spalling on exposed concrete


Do a little net search.
Spalling is an IMMENSE problem in concrete structures.

pillars, e.g., bridge supports, basement supports,
etc. since they have lots of rebar.


They generally know what they are doing.

In Quebec recently an overpass collapsed killing people. Spalling is the probable
cause.

Spalling in concrete on the ground can be very bad due to the moisture. There is such
a thing as TOO much rebar.




Do a little net search.

Spalling is an IMMENSE problem in concrete structures.

Rebar corrosion....one of the causes of spalling

is strongly dependent on the thickness of the cover (amount of concrete
over the rebar), soundness of the concrete & the local environment.

a marine environment is probably one of the worst as is one where snow
removal chemicals are used

general cover suggestions

air 2"
soil 3"
marine environment a lot more

another cause of spalling is freeze thaw but I doubt we're concerned
with this on the OP's driveway

plus to add "too much rebar" to a slab it would have to be quite a
bit....I'm sure the OP's driveway project will get less than minimum
temperature (if it get's any)

btw I'd wait until some investigation work has been done before
suggesting a reason for the Quebec overpass collapse you mention.

This isn't the first collapse.

cheers
Bob



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crack in microwave [email protected] Home Repair 16 October 25th 16 12:36 AM
Darn crack! stoutman Woodworking 13 April 26th 06 12:10 AM
How do I repair very small cracks in concrete in Driveway? Anyone ever use Crack Filler Liquid Cement by DAP? [email protected] Home Repair 1 October 13th 05 12:30 PM
AD: Make Crafts at Home and Make extra money on the side! Tim Metalworking 0 September 5th 04 11:50 PM
What driveway deicer to use on asphalt driveway? sams Home Repair 2 December 8th 03 11:38 PM


All times are GMT +1. The time now is 12:00 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"