Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1
Default Hot water

My hot water doesn't stay hot for very long when I am running it. Does
this mean that I have to get a new water tank or is there something I can
do. Also, I don't have alot of water pressure comming out of my hot water
side on my faucet. It is starting to get worse and I don't know what to
do.
  #2   Report Post  
Posted to alt.home.repair
RBM RBM is offline
external usenet poster
 
Posts: 1,690
Default Hot water

There are many possibilities, for this. If your water is made by a coil, on
a boiler, it could be clogged. You could have some galvanized piping, which
over time gets restricted internally. You may just have to turn up the
thermostat on the water heater



"chrisact34" wrote in message
news:793d19b363ab5251b001b0ba7a4da137@homerepairli ve.com...
My hot water doesn't stay hot for very long when I am running it. Does
this mean that I have to get a new water tank or is there something I can
do. Also, I don't have alot of water pressure comming out of my hot water
side on my faucet. It is starting to get worse and I don't know what to
do.



  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 5,823
Default Hot water


"chrisact34" wrote in message
news:793d19b363ab5251b001b0ba7a4da137@homerepairli ve.com...
My hot water doesn't stay hot for very long when I am running it. Does
this mean that I have to get a new water tank or is there something I can
do. Also, I don't have alot of water pressure comming out of my hot water
side on my faucet. It is starting to get worse and I don't know what to
do.



What type of tank? Gas or electric? You may have a heating element gone bad
or the thermostat of a gas heater not functioning properly. Or you kids may
have been playing around it and changed the heat setting. Lack of pressure
indicates clogging of the flow, possible mineral deposits building up.

Keep in mind, if you live in a cold areas, the incoming water is getting
colder too and exacerbating the problem.


  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 6,375
Default Hot water

In article , "Edwin Pawlowski" wrote:

"chrisact34" wrote in message
news:793d19b363ab5251b001b0ba7a4da137@homerepairl ive.com...
My hot water doesn't stay hot for very long when I am running it. Does
this mean that I have to get a new water tank or is there something I can
do. Also, I don't have alot of water pressure comming out of my hot water
side on my faucet. It is starting to get worse and I don't know what to
do.



What type of tank? Gas or electric? You may have a heating element gone bad
or the thermostat of a gas heater not functioning properly. Or you kids may
have been playing around it and changed the heat setting. Lack of pressure
indicates clogging of the flow, possible mineral deposits building up.

Keep in mind, if you live in a cold areas, the incoming water is getting
colder too and exacerbating the problem.


In addition to this excellent advice, let me add one mo examine the piping
going into the water heater, to make sure it's connected properly. When we
bought our previous house, I soon discovered that the water heater would
provide very hot water for six or seven minutes, which would then abruptly
become tepid and stay that way as long as the hot water continued to run.

It turned out that the pipes had been connected backward when it was
installed: hot to the inlet, and cold to the outlet. So the hot water was
withdrawn from the bottom of the tank (right next to the heating element), and
cold water entered the tank at the top -- where it promptly sank to the
bottom, chilling the entire contents. Reconnecting the pipes properly solved
the problem.

--
Regards,
Doug Miller (alphageek at milmac dot com)

It's time to throw all their damned tea in the harbor again.
  #5   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,072
Default Hot water

"chrisact34" wrote in
news:793d19b363ab5251b001b0ba7a4da137@homerepairli ve.com:

My hot water doesn't stay hot for very long when I am running it. Does
this mean that I have to get a new water tank or is there something I can
do. Also, I don't have alot of water pressure comming out of my hot water
side on my faucet. It is starting to get worse and I don't know what to
do.



Along with other valid possibilities already mentioned is a broken dip tube
in the tank. Cold water inlet gets dumped in the top vs where it's suppose
to at the bottom.


  #6   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 229
Default Hot water

Doug Miller wrote:
In article , "Edwin
Pawlowski" wrote:

"chrisact34" wrote in message
news:793d19b363ab5251b001b0ba7a4da137@homerepairli ve.com...
My hot water doesn't stay hot for very long when I am running it.
Does this mean that I have to get a new water tank or is there
something I can do. Also, I don't have alot of water pressure
comming out of my hot water side on my faucet. It is starting to
get worse and I don't know what to do.



What type of tank? Gas or electric? You may have a heating element
gone bad or the thermostat of a gas heater not functioning properly.
Or you kids may have been playing around it and changed the heat
setting. Lack of pressure indicates clogging of the flow, possible
mineral deposits building up.

Keep in mind, if you live in a cold areas, the incoming water is
getting colder too and exacerbating the problem.


In addition to this excellent advice, let me add one mo examine
the piping
going into the water heater, to make sure it's connected properly.
When we
bought our previous house, I soon discovered that the water heater
would
provide very hot water for six or seven minutes, which would then
abruptly
become tepid and stay that way as long as the hot water continued to
run.

It turned out that the pipes had been connected backward when it was
installed: hot to the inlet, and cold to the outlet. So the hot water
was
withdrawn from the bottom of the tank (right next to the heating
element), and
cold water entered the tank at the top -- where it promptly sank to
the
bottom, chilling the entire contents. Reconnecting the pipes properly
solved
the problem.


Even if the lines are correctly connected the dip tube may be damaged as
well.

--
Joseph Meehan

Dia 's Muire duit



  #7   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 178
Default Hot water

Joseph Meehan wrote:
Doug Miller wrote:
In article , "Edwin
Pawlowski" wrote:
"chrisact34" wrote in message
news:793d19b363ab5251b001b0ba7a4da137@homerepairli ve.com...
My hot water doesn't stay hot for very long when I am running it.
Does this mean that I have to get a new water tank or is there
something I can do. Also, I don't have alot of water pressure
comming out of my hot water side on my faucet. It is starting to
get worse and I don't know what to do.

What type of tank? Gas or electric? You may have a heating element
gone bad or the thermostat of a gas heater not functioning properly.
Or you kids may have been playing around it and changed the heat
setting. Lack of pressure indicates clogging of the flow, possible
mineral deposits building up.

Keep in mind, if you live in a cold areas, the incoming water is
getting colder too and exacerbating the problem.

In addition to this excellent advice, let me add one mo examine
the piping
going into the water heater, to make sure it's connected properly.
When we
bought our previous house, I soon discovered that the water heater
would
provide very hot water for six or seven minutes, which would then
abruptly
become tepid and stay that way as long as the hot water continued to
run.

It turned out that the pipes had been connected backward when it was
installed: hot to the inlet, and cold to the outlet. So the hot water
was
withdrawn from the bottom of the tank (right next to the heating
element), and
cold water entered the tank at the top -- where it promptly sank to
the
bottom, chilling the entire contents. Reconnecting the pipes properly
solved
the problem.


Even if the lines are correctly connected the dip tube may be damaged as
well.


Or it could have fallen off.
  #8   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 509
Default Hot water

"chrisact34" writes:

My hot water doesn't stay hot for very long when I am running it. Does
this mean that I have to get a new water tank or is there something I can
do. Also, I don't have alot of water pressure comming out of my hot water
side on my faucet. It is starting to get worse and I don't know what to
do.


Could be. You might have a boatload of sediment or build up in the
tank decreasing its effective capacity and blocking flow.

How old is the water heater?

--
Todd H.
http://www.toddh.net/
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Choosing a HOT WATER RECIRCULATOR for QUICK HOT WATER DELIVERY or for HOT WATER ON D'MAND is now a whole lot easier. [email protected] Home Repair 22 June 7th 06 01:09 AM
Run out of Hot water quickly: Hot water tank defective? [email protected] Home Repair 15 February 10th 06 07:05 PM
Convert gas hot water heater into hot water heating system? kelvin_cool_ohm Home Ownership 1 June 6th 05 02:31 PM
The Hot Water Lobster (Hot Water Circulation system) Sam Home Ownership 1 March 22nd 05 07:31 PM
hot water recirculator, instant hot water but not a water heating unit, saves water, gas, time, money HeatMan Home Repair 0 August 24th 03 12:26 PM


All times are GMT +1. The time now is 10:37 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"