Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Need advice for setting furnace draft control.
I recently change the location of the calibrated draft control
from inside the furnace room to the adjoining unheated garage . This required a horizontal 4 ft. length of 6 inch pipe to join the tee coming from the furnace to which I added the draft control on the garage side. The weight on the draft control was originally put on the side for vertical flues of the control and not on the side that stated for a horizontal flue. My questions are; Where does the weight go and was the weight originally put on the wrong side. What should the setting be. It was set at 2. Thanks for your ideas and help. Tony. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Purchasing Furnace - 2-Stage Variable vs. Standard | Home Repair | |||
Desperate for advice on replacing dead 255K BTU furnace in 3200 sq foot house | Home Repair | |||
Arcoaire RPJ furnace problem, need advice | Home Repair | |||
high efficiency gas furnace advice please | Home Repair | |||
Drilling metal control panel advice... | Metalworking |