Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
removing/covering up bad paint
all right. i am in the process of scraping paint off my bathroom walls
and ceiling. i don't want to scrape anymore! i don't know if there is some sort of sealer on the walls or what. it's drywall, the building was built in 1980. there is something on the walls, i don't think it's oil paint because it doesn't come off unless i gouge at it with the scraper, but it's glossy and was probably at one time white but is now yellow. i'd primed and painted over it probably 3 years ago. there are places where it was peeling, so i started to pick at it and a lot of it peeled off, sometimes in fairly large sized sheets. that would be fine if i could take it all off that way, but what's left is sticking pretty well and is hard to scrape. i haven't even started the ceiling. my question is: can i just put drywall mud or plaster or something to that extent over it? will it stick or will it more likely flake off? my bathroom's been in disarray for the last month because i can only spend about an hour at a time before i get bored/frustrated and need to do something else and at this point i'm about 50% done... i need my bathroom back! thanks. |
#2
Posted to alt.home.repair
|
|||
|
|||
removing/covering up bad paint
|
#3
Posted to alt.home.repair
|
|||
|
|||
removing/covering up bad paint
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is tinted primer + one coat of paint enough for repainting walls? | Home Repair | |||
Question about latex paint which is solidifying in the can | Home Repair | |||
Benjamin Moore paint types | Home Ownership |