Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Kenmore Washer-not agitating or spinning
I have a 6 year old Kenmore washing machine. I have replaced the dogs three
times so that it can agitate. The last one was 2 months ago. But today I heard a clicking sound and stopped it but now it won't agitate or spin. It does fill and drain. Any ideas. Thanks. |
#2
Posted to alt.home.repair
|
|||
|
|||
Kenmore Washer-not agitating or spinning
humorous free expert at:
http://fixitnow.com/ hdieter wrote: I have a 6 year old Kenmore washing machine. I have replaced the dogs three times so that it can agitate. The last one was 2 months ago. But today I heard a clicking sound and stopped it but now it won't agitate or spin. It does fill and drain. Any ideas. Thanks. |
#3
Posted to alt.home.repair
|
|||
|
|||
Kenmore Washer-not agitating or spinning
hdieter wrote: I have a 6 year old Kenmore washing machine. I have replaced the dogs three times so that it can agitate. The last one was 2 months ago. But today I heard a clicking sound and stopped it but now it won't agitate or spin. It does fill and drain. Any ideas. Thanks. Hi, No model# posted as Kenmore is made by several different companies. Maybe the motor coupler broke... http://www.applianceaid.com/procedures.html jeff. Appliance Repair Aid http://www.applianceaid.com/ |
#4
Posted to alt.home.repair
|
|||
|
|||
Kenmore Washer-not agitating or spinning
hdieter,
A slipping drivebelt could cause this problem. Check your belt tension Dave M. |
#5
Posted to alt.home.repair
|
|||
|
|||
Kenmore Washer-not agitating or spinning
I am basing this answer on the model you own being a direct drive
model. This class of machines comprises most top load washers that have been produced by Whirlpool or Kenmore since the mid-80s. This class of machine replaced the production of belt drive machines around the same time. All direct drive machine share a common configuration below the lid, with the differences being size of basket, type of agitator, and other features. Older direct drive models depend on the lid switch for the spin/drain only. So, if it is draining, you know it is not your lid switch, or the motor for that matter. There is no belt on a direct drive machine. The component that is in common with agitation and spin is the motor coupler, which transfers energy from the motor to the gearcase. Tilt the washer back and look in the area between the motor and the gearcase, at the front of the machine, underneath. There will be a plastic disk on the motor, a rubber spacer, and another plastic piece on the gearcase. More than likely, one or more of these 3 are broken. You may see either plastic or rubber shavings on the ground. You can press on the rubber spacer and if it can be depressed easily, that is a good indication that trouble is present. Replacing the components is easier when the cabinet is removed (you can seach on the internet how to do this), but from underneath, you would... 1. Remove pump clips that hold it to motor, and swing out of the way. 2. Remove motor clips that hold it to gearcase, and put it aside. 3. Remove and replace plastic coupler parts on motor and gearcase, correct placement is flush with respective shaft. You can use a long 1/2" socket and a hammer to assist. Place the socket on the plastic piece and tap it into place. 4. Put rubber coupler piece onto gearcase coupler piece, allign motor with that and start putting it all back together. There actually is a heavy-duty coupler kit that is available, though the regular duty kit is most common. A good parts counter will know about this. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kenmore front-loading washer leaks | Home Repair | |||
Kenmore 80 Series Washer Wobbles on Spin | Home Repair | |||
Kenmore Washer model 110.4680290 Rusting | Home Repair | |||
Kenmore washer acting strange | Home Repair | |||
kenmore 90 series washer - lid switch removal secrets (for changing it)? | Home Repair |