Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
djlee
 
Posts: n/a
Default Fixing Existing Texture over a bad Drywall Joint

Hello,
I have a wall that currently has a knockdown texture on it. There is a
distinctly visible line about 1 to 2 inches in width (looks like at a
joint that was not floated correctly) where the wall appears to dip in.
Knockdown texture was applied over this area the texture seems taller and
gives the wall an uneven look.

What is the best technique to even out this area? I do not wish to
re-texture the entire wall. Any help is welcomed and appreciated.

Lee

____________________________________
Posted via Homerepairlive.com
http://www.homerepairlive.com
  #2   Report Post  
Posted to alt.home.repair
mikeytag
 
Posts: n/a
Default Fixing Existing Texture over a bad Drywall Joint

Lee,
I have a similar problem in a few areas of my house. My contractor told me
that it is because the previous owner didn't tape over the crack before
mudding it. What you might need to do is sand down the entire area to the
sheetrock. Then apply fibatape, mud over that and sand it down as even as
possible. After that point you can add texture and paint. It may be tough
too make it look exactly right though. I haven't had too much luck getting
repair textures to match exactly right but it might be "good enough".

Mike

____________________________________
Posted via Homerepairlive.com
http://www.homerepairlive.com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interesting Joint Andy Dingley Woodworking 2 May 28th 04 05:00 PM
Bad odor coming from expansion joint around interior wall of home John Hughes Home Repair 2 December 9th 03 07:05 PM
How to redo drywall taping on garage ceiling?? Ron Home Repair 8 November 26th 03 02:29 PM
Scarf joint or butt joint your choice on crown molding? Bay Area Dave Woodworking 16 October 11th 03 06:06 PM
How to do drywall taping without sanding? Tom J Home Ownership 1 July 29th 03 04:58 PM


All times are GMT +1. The time now is 12:41 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"