I have a 11hp B&S motor on a John Deere 111, my question is that I
barely touch the throttle and the motor revs very, very high. Is there
a screw adjustment on the carb to adjust top end throttle?

Thanks
Chad

Yes there is an adjusting screw, however it would not change on it's own.
The outer cable sheath may have slipped out of adjustment or the governor
spring may be unhooked or broken.
wrote in message
oups.com...
I have a 11hp B&S motor on a John Deere 111, my question is that I
barely touch the throttle and the motor revs very, very high. Is there
a screw adjustment on the carb to adjust top end throttle?

Thanks
Chad

Is there a place on the web that would have a picture of the springs
and such?

On 27 Feb 2006 12:25:02 -0800, "
wrote:

Is there a place on the web that would have a picture of the springs
and such?

Start he

http://www.briggsandstratton.com/dis...sp?docid=74604


Oren
"My doctor says I have a malformed public-duty gland
and a natural deficiency in moral fiber, and that I am therefore
excused from saving Universes."