Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
I've been thinking about adding a small recirculation line to reduce
the waiting time for hot (warm?) water at the kitchen sink. The other option I've thought of would be to wrap the pipe with heat wire. Since I have an electric water heater I don't suppose there is a difference efficiency-wise. Has anyone played with this problem? Thanks. |
#2
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
insulate the lines no matter what you do.
the heat tape isnt efficent, its just designed to keep the pipes from freezing not heat the water. the pump system is best, a close second would be a small point of use water heater for just the kitchen. fed from the regular hot water tank |
#3
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
"Dave" wrote in message ups.com... I've been thinking about adding a small recirculation line to reduce the waiting time for hot (warm?) water at the kitchen sink. The other option I've thought of would be to wrap the pipe with heat wire. Since I have an electric water heater I don't suppose there is a difference efficiency-wise. Has anyone played with this problem? Thanks. How much energy does a recirculation pump system waste. I am more interested in the heat loss in the pipes rather then the electricity to run the pump. Granted that it depends on how long and how well insulated is the pipe. Some of the heat is not lost, it goes back in the house. I am just trying to assess cost of operation versus cost of wasting water. Can the pump be installed relatively easily in a built house? Thanks Mauro |
#4
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
MG wrote: "Dave" wrote in message ups.com... I've been thinking about adding a small recirculation line to reduce the waiting time for hot (warm?) water at the kitchen sink. The other option I've thought of would be to wrap the pipe with heat wire. Since I have an electric water heater I don't suppose there is a difference efficiency-wise. Has anyone played with this problem? Thanks. How much energy does a recirculation pump system waste. I am more interested in the heat loss in the pipes rather then the electricity to run the pump. Granted that it depends on how long and how well insulated is the pipe. Some of the heat is not lost, it goes back in the house. I am just trying to assess cost of operation versus cost of wasting water. Can the pump be installed relatively easily in a built house? Thanks Mauro There are pumps that are relatively easy to install. There are several types available. Some are simply thermostat controlled, they keep the water circulated so it's always hot. Of course, these use the most energy, mostly in heat loss. Some may have timers so you can set the periods when you want the water to be hot. The other main type is on-demand. A push button is located at the sink. You push it and that starts the pump running, which runs until the water gets hot. Some have wireless remotes available, so you can start it from your bedroom, or use the remote in a second bathroom, that is served by the same pipe run. Both types pump the water from the hot side back into the cold, so that no water is lost. |
#6
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
Dave wrote:
I've been thinking about adding a small recirculation line to reduce the waiting time for hot (warm?) water at the kitchen sink. The other option I've thought of would be to wrap the pipe with heat wire. Since I have an electric water heater I don't suppose there is a difference efficiency-wise. Has anyone played with this problem? Thanks. I will make one additional suggestion. Using a smaller pipe means you waste less water each time you wait for it to get hot. It also means you usually want less time. You can't feed multiple outlets if more than one might be on at the same time, but it is a thought. -- Joseph Meehan Dia duit |
#7
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
I added a pumpless recirculation line from the bathroom back to a nipple
on the water heater leading to the drain valve. I insulated the supply side, and left the return line uninsulated, and let gravity do the work. It works very well and to me the only energy cost is some heat in the house during the few months we run the air conditioner (during the winter, its like a radiator), and there is no water loss. I didn't use a pump because of the energy cost, and I don't particularly want tepid water when I turn on the cold. I think a lot depends on the nature of your house. I have an old frame house with an attic, two floors, and a basement, so access was easy; if I had a house built on a slab, the recirculation loop would not work. Dave wrote: I've been thinking about adding a small recirculation line to reduce the waiting time for hot (warm?) water at the kitchen sink. The other option I've thought of would be to wrap the pipe with heat wire. Since I have an electric water heater I don't suppose there is a difference efficiency-wise. Has anyone played with this problem? Thanks. |
#8
Posted to alt.home.repair
|
|||
|
|||
Hot Water -- Faster
Dave wrote:
I've been thinking about adding a small recirculation line to reduce the waiting time for hot (warm?) water at the kitchen sink. The other option I've thought of would be to wrap the pipe with heat wire. Since I have an electric water heater I don't suppose there is a difference efficiency-wise. Has anyone played with this problem? Thanks. Either will increase your energy use. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Salt content of softened water | Home Repair | |||
The #1 rated home water filter in America Aquasana AQ-4000 | Home Ownership | |||
The #1 rated home water filter in America Aquasana AQ-4000 | Home Ownership | |||
Heat banks (again!) | UK diy |