Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Plug & Socket HOT - Why?
- Colonel - wrote:
OK, I know just enough about electricity to be dangerous, but this one has me stumped. Today I had an oil convection electric heater (1500W) turned on in the bathroom to heat up the room before taking a shower, and when I unplugged it, I noticed the prongs of the plug were HOT. Probably like 175°F hot...almost too hot to touch. Then I put my hand on the socket and that was hot, too. Yet the cord to the heater wasn't even warm. If the heater uses 1500W I assume that at 125V my load is about 12A...right? It's an old house but the wiring is modern Romex. Why would the prongs of the plug and the socket get so hot? Resistance in the plug? (The plug APPEARS undamaged, and we always pull it out by grabbing the plug, not the wire). Should I put a new plug onto the cord? Is it likely there was resistance or a bad connection in the socket? Thanks for any clues. Following up on another poster, first determine if the problem lies with the plug or the socket. Power the heater from another socket far away. If the plug still gets hot, you've got a plug problem; if not, you've got a socket problem. (It IS possible, too, that you've got BOTH a plug problem AND a socket problem.) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plug & Socket HOT - Why? | Home Repair | |||
Plug & Socket HOT - Why? | Home Repair | |||
Plug & Socket HOT - Why? | Home Repair | |||
Weird phone wiring with new flat - help needed with BT Broadband and master socket | UK diy | |||
Quick change 'plug & socket' Sunvic 3 port actuator | UK diy |