Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Romex wiring
I am finishing an office in my basement and have never worked with
Romex before. I always did the conduit and wire method. I installed outlets in an office I built and hooked the circuit to a hot line. When I checked the outlets they all said open ground except the last one in line and it showed correctly wired. That one has the ground wire connected right to the outlets grren screw. The outlets in between the correct one and where I hooked into the power all say open ground. I just twisted the ground wire together and continued down the line. I take it that is incorrect? Please advise. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Worked on output wiring and enclosure today... My $45 homemade 10 HP phase converter is WORKING!!! | Metalworking | |||
Non-Grounded Cloth Romex Wiring - replace or keep ? | Home Repair | |||
gas fireplace - wiring question | Home Repair | |||
telephone wiring question | Home Repair | |||
peculiar wiring in residential switch box? | Home Repair |