Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
jzink0883 wrote:
Kitchen recently remodeled. Cabinet installer ran 20-feet of soft copper tubing from sink to refrigerator. Not enough slack behind refrigerator. I don't like the path of the tubing. It could be pinched or broken. I should have had a new copper-pipe supply line run from the kitchen sink to the refrigerator. Now, it would be very difficult to sweat a rigid line in the back of the new cabinets. The McMaster-Carr catalog lists red brass threaded pipe (schedule 40, WWN-351a, ASTM B43-91) and red brass threaded fittings. Is red-brass threaded pipe appropriate for a rigid line from the kitchen sink to the wall behind the refrigerator? Thanks, Joel Zink It may be appropriate but sure sounds like overkill. You could run 1/2" Type L (5/8 OD) soft tube and use compression fittings (or even flare) if soldering is out of the question. Could be smaller diam too since the flow to the fridg is negligible. Jim |
#2
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
Kitchen recently remodeled. Cabinet installer ran 20-feet of soft
copper tubing from sink to refrigerator. Not enough slack behind refrigerator. I don't like the path of the tubing. It could be pinched or broken. I should have had a new copper-pipe supply line run from the kitchen sink to the refrigerator. Now, it would be very difficult to sweat a rigid line in the back of the new cabinets. The McMaster-Carr catalog lists red brass threaded pipe (schedule 40, WWN-351a, ASTM B43-91) and red brass threaded fittings. Is red-brass threaded pipe appropriate for a rigid line from the kitchen sink to the wall behind the refrigerator? Thanks, Joel Zink |
#3
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
jzink0883 wrote:
Kitchen recently remodeled. Cabinet installer ran 20-feet of soft copper tubing from sink to refrigerator. Not enough slack behind refrigerator. I don't like the path of the tubing. It could be pinched or broken. I should have had a new copper-pipe supply line run from the kitchen sink to the refrigerator. Now, it would be very difficult to sweat a rigid line in the back of the new cabinets. The McMaster-Carr catalog lists red brass threaded pipe (schedule 40, WWN-351a, ASTM B43-91) and red brass threaded fittings. Is red-brass threaded pipe appropriate for a rigid line from the kitchen sink to the wall behind the refrigerator? It'll work, but if you can do it, why can't you do the regular copper? Other than some heat shielding for the soldering, you'll still need access so that wouldn't seem to be the limiting factor... Alternatively, how/where is the existing tubing run? Can you not protect it to the point of the junction behind the refrigerator and then add some additional line there for the accessibility? |
#4
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
Duane Bozarth wrote:
jzink0883 wrote: Kitchen recently remodeled. Cabinet installer ran 20-feet of soft copper tubing from sink to refrigerator. Not enough slack behind refrigerator. I don't like the path of the tubing. It could be pinched or broken. I should have had a new copper-pipe supply line run from the kitchen sink to the refrigerator. Now, it would be very difficult to sweat a rigid line in the back of the new cabinets. The McMaster-Carr catalog lists red brass threaded pipe (schedule 40, WWN-351a, ASTM B43-91) and red brass threaded fittings. Is red-brass threaded pipe appropriate for a rigid line from the kitchen sink to the wall behind the refrigerator? It'll work, but if you can do it, why can't you do the regular copper? Other than some heat shielding for the soldering, you'll still need access so that wouldn't seem to be the limiting factor... Alternatively, how/where is the existing tubing run? Can you not protect it to the point of the junction behind the refrigerator and then add some additional line there for the accessibility? And, one could also sweat threaded fittings onto solid and assemble them if one were so inclined... As SpeedyJim notes, the brass pipe is _way_ overkill for the job. |
#5
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
Ever hear of plastic tubing? It is flexible and durable.
|
#6
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
|
#7
Posted to alt.home.repair
|
|||
|
|||
brass threaded pipe for supply line to icemaker
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How much water in a copper tube? | Home Repair | |||
3/4" vs. 1" pipe for service line to house | Home Repair | |||
Joining Plastic Waste pipe to Lead pipe | UK diy | |||
undoing cast iron soil pipe joint | UK diy | |||
Replacing old steel water main supply pipe | UK diy |