When our gas furnace lights, it clicks until it lights, then continues
to click for about 2 minutes after it has lighted, then stops clicking.


Is this a problem, or normal? Of course if it's a problem, what is the
problem and how to fix?

-Thanks
KJ

wrote:
When our gas furnace lights, it clicks until it lights, then continues
to click for about 2 minutes after it has lighted, then stops clicking.


Is this a problem, or normal? Of course if it's a problem, what is the
problem and how to fix?

-Thanks
KJ

Greetings,

2 minutes? If so you might want to replace something called the
"thermocoupler". Pick up a new one at Home Depot for $12 and follow
the simple install instructions on the box (it just screws on). It
might not be your problem but it is likely.

Hope this helps,
William

KJ,

You are probably hearing the electronic spark ignition. It puts out a couple of
clicks per second, or rather sparks to light the pilot flame. How long it goes
on for varies with the furnace. Since its a gas fired appliance and has the
potential to blow your family and house sky-high, it's a good idea to a have a
certified specialist check it out and give it a yearly inspection. Call it peace
of mind.

Dave


In article .com,
wrote:

When our gas furnace lights, it clicks until it lights, then continues
to click for about 2 minutes after it has lighted, then stops clicking.


Is this a problem, or normal? Of course if it's a problem, what is the
problem and how to fix?

-Thanks
KJ

wrote:
wrote:

When our gas furnace lights, it clicks until it lights, then continues
to click for about 2 minutes after it has lighted, then stops clicking.


Is this a problem, or normal? Of course if it's a problem, what is the
problem and how to fix?

-Thanks
KJ


Greetings,

2 minutes? If so you might want to replace something called the
"thermocoupler". Pick up a new one at Home Depot for $12 and follow
the simple install instructions on the box (it just screws on). It
might not be your problem but it is likely.

Hope this helps,
William

There are no systems that use thermocouples in which a clicking noise is
related in any way to thermocouple failure. I'm surprised you didn't
suggest a new t-stat, since most homeowners who start throwing parts at
their system tend to suspect the t-stat first. I suppose that's because
its easily accessible, and is, to the best of their knowledge, the only
control device in the system. You OTOH are aware of the existence of
thermocouples, therefore that must be the problem eh?

On a gas fired appliance, if there is anything abnormal taking place
turn it off and get a qualified tech to look at it immediately.

hvacrmedic