Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Best exterior paint for metal gates?
I am doing a painting project for my church. I am painting some large
metal gates which secure portions of the church when it is closed. I have prepared the surfaces of the gates (i.e., removed chipping paint, sanded and cleaned) and applied a rusty metal primer. At the suggestion of the paint person at Lowes, I bought a gallon of an exterior latex from Lowe's: American Tradition 100% Acrylic Semi-Gloss Houise and Trim. After buying the Lowe's paint, I've begun to have second thoughts. The gates are exposed to direct sunlight several hours of the day. I want the paint job to last for some years. Are there better options for paint than the one I selected if the objective is longevity? I would appreciate some advice. Thanks, Al Kondo |
#2
|
|||
|
|||
That is house and trim paint. I would go for an exterior oil gloss paint,
the type that your local car repair shop uses to repair car paint. It lasts on a car, it should last on a gate. I have also had good results with a "rust" paint such as "Tremclad" or "Rustoleum", especially when used over a quality metal primer instead of direct on the metal. "Al Kondo" wrote in message ... I am doing a painting project for my church. I am painting some large metal gates which secure portions of the church when it is closed. I have prepared the surfaces of the gates (i.e., removed chipping paint, sanded and cleaned) and applied a rusty metal primer. At the suggestion of the paint person at Lowes, I bought a gallon of an exterior latex from Lowe's: American Tradition 100% Acrylic Semi-Gloss Houise and Trim. After buying the Lowe's paint, I've begun to have second thoughts. The gates are exposed to direct sunlight several hours of the day. I want the paint job to last for some years. Are there better options for paint than the one I selected if the objective is longevity? I would appreciate some advice. Thanks, Al Kondo |
#3
|
|||
|
|||
Al Kondo wrote:
I am doing a painting project for my church. I am painting some large metal gates which secure portions of the church when it is closed. I have prepared the surfaces of the gates (i.e., removed chipping paint, sanded and cleaned) and applied a rusty metal primer. At the suggestion of the paint person at Lowes, I bought a gallon of an exterior latex from Lowe's: American Tradition 100% Acrylic Semi-Gloss Houise and Trim. If you are looking for quality paint it is better to avoid the box stores and go to a real paint store. After buying the Lowe's paint, I've begun to have second thoughts. The gates are exposed to direct sunlight several hours of the day. I want the paint job to last for some years. Are there better options for paint than the one I selected if the objective is longevity? I would appreciate some advice. Thanks, Al Kondo |
#4
|
|||
|
|||
Al Kondo wrote:
I am doing a painting project for my church. I am painting some large metal gates which secure portions of the church when it is closed. I have prepared the surfaces of the gates (i.e., removed chipping paint, sanded and cleaned) and applied a rusty metal primer. At the suggestion of the paint person at Lowes, I bought a gallon of an exterior latex from Lowe's: American Tradition 100% Acrylic Semi-Gloss Houise and Trim. After buying the Lowe's paint, I've begun to have second thoughts. The gates are exposed to direct sunlight several hours of the day. I want the paint job to last for some years. Are there better options for paint than the one I selected if the objective is longevity? I would appreciate some advice. Thanks, Al Kondo Yes there are better options. Any kind of latex paint is a poor options on metal. If I were you I would use a gloss Rust Oelum oil base. I assume your rusty metal primer was oil based, so all you need to do is spray on the oil based paint. I put RustOleum on the roof of my metal tool shed. Sprayed with their brown primer then a coat of gloss white. That's about as severe duty as you get without being next to the ocean or a very big lake. Still looks good. |
#5
|
|||
|
|||
"Al Kondo" wrote in message ... I am doing a painting project for my church. I am painting some large metal gates which secure portions of the church when it is closed. I have prepared the surfaces of the gates (i.e., removed chipping paint, sanded and cleaned) and applied a rusty metal primer. At the suggestion of the paint person at Lowes, I bought a gallon of an exterior latex from Lowe's: American Tradition 100% Acrylic Semi-Gloss Houise and Trim. After buying the Lowe's paint, I've begun to have second thoughts. The gates are exposed to direct sunlight several hours of the day. I want the paint job to last for some years. Are there better options for paint than the one I selected if the objective is longevity? I would appreciate some advice. Thanks, Al Kondo AK. 5 years ago I sanded and primed the top of my truck and spray canned with Krylon Gloss White. Truck sits out all the time, not garaged. Paint still in excellent condition. WW |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
powder coated gates dulling | UK diy | |||
HANGING DRIVEWAY GATES | UK diy | |||
DRIVEWAY GATES IN SOUTHEAST | UK diy | |||
multiple blast gates on one drop | Woodworking | |||
OT- Bill Gates Speech | Metalworking |