Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
excap
 
Posts: n/a
Default Electric Panel Heaters

http://eheat.com/

Does anyone have any experience with these? Do they work as advertised?
How is the electricity consumption and did they offer any return on the
investment as far as decreased oil/gas usage?


  #2   Report Post  
SQLit
 
Posts: n/a
Default


"excap" wrote in message
...
http://eheat.com/

Does anyone have any experience with these? Do they work as advertised?
How is the electricity consumption and did they offer any return on the
investment as far as decreased oil/gas usage?


electric panel heaters in my experience use power to prevent moisture in the
switch gear. Yes they perform the function if your in that kind of need.

The heaters that I have seen are usually 1200 watts per section. They are
sometimes set up on t-stats some time on all of the time.

ROI ??????? You must be talking about something other that what I am.


  #3   Report Post  
Pop
 
Posts: n/a
Default

"excap" wrote in message
...
http://eheat.com/

Does anyone have any experience with these? Do they
work as advertised?
How is the electricity consumption and did they offer
any return on the
investment as far as decreased oil/gas usage?


Space heaters, whatever the type, ARE useful for
heating that little niche that always feels cold, or
where the heat just won't reach for whatever reason;
maybe a room is just too far from the furnace to get
good heat to it, say, or a temporary fix for some other
problem. I've used them now and again and still have a
few around, kero and electric types.
No way however, can electricity compare with gas,
oil or other sources of heating except possibly some
catalytics. Electricity will ALWAYS cost more to heat
with.
Space heaters, BTW, are usually to heat just that: A
"space", not a room. Convection is OK but not a great
method of moving heat around a room. For that you need
fans of some type.

I took a brief look at the site, and I'll say it only
reinforced my opinion, which isn't good, of electric
space heaters. It's 400W they claimed. Well, you can
easily imagine how well it would heat by replacing the
unit, mentally, with four 100 watt bulbs. Same heat
output or a trifle more from the bulbs.
A watt is a watt, and a btu is a btu. Efficiency
cannot be anything but high when you talk about putting
elecricity through a resistive element, so they're no
more efficient than any other electric heat source, nor
four hundred watt bulbs.
I find a lot of their hype pretty meaningless, even
with a ten by ten room "properly insulated" or however
they phrased it. eg, What was the outdoor temp, how
many windows, what rate of air exchange, and so on?.

At any rate, a btu being a btu, and that being a
measure of the heat given off by any object, that's the
only accurate comparison one can really make. To
generate a btu with electricity and a btu with oil are
two scales which at this point, unless you can get
commercial hi-usage rates, is not going to come close
to being a savings of any kind. Their hoopla is BS.
The whole web site looks spammy, IMO.

FWIW,

Pop



  #4   Report Post  
Beachcomber
 
Posts: n/a
Default

On Thu, 11 Aug 2005 16:12:55 GMT, "excap"
wrote:

http://eheat.com/

Does anyone have any experience with these? Do they work as advertised?
How is the electricity consumption and did they offer any return on the
investment as far as decreased oil/gas usage?



These appear to be electrical resistance heaters in just another form.
Even though electrical resisitance heating is 100% efficient, it is
generally the most expensive method of heating in most parts of the
world. You pay the same per kilowatt whether it is a radiant heater,
or an electric oil-filled convection heater or a baseboard electric
heater on the wall. If these are sized smaller than normal heaters,
then yes, the cost and consumption will be less but so will the heat
output.

Beachcomber


  #5   Report Post  
 
Posts: n/a
Default

Beachcomber wrote:

...You pay the same per kilowatt whether it is a radiant heater,
or an electric oil-filled convection heater or a baseboard electric
heater on the wall.


Nonono. You pay the same per kilowatt-hour of electrical energy.

Nick



  #6   Report Post  
Joseph Meehan
 
Posts: n/a
Default

excap wrote:
http://eheat.com/

Does anyone have any experience with these? Do they work as
advertised? How is the electricity consumption and did they offer any
return on the investment as far as decreased oil/gas usage?


The cost of resistance heat is the same no matter what shape it is in.
The panels may be very convenient and assuming they spot heat well, they
will allow you to use less total energy and still feel equally or more warm.

--
Joseph Meehan

Dia duit


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Removing panel from PVC-U door Peter Saffrey UK diy 6 March 22nd 05 03:34 PM
Portable Electric Heaters - Which is better? [email protected] Home Repair 5 January 24th 05 02:53 PM
GE HTS22GBMARWW Digital Controls refrig 22 cu ft.....main bord failure number #3! henrib7 Home Repair 7 June 13th 04 09:30 AM
Flat panel heaters Tom Miller UK diy 5 January 8th 04 05:30 PM
has anyone used hydro-sil electric heaters? X Home Repair 5 December 20th 03 04:05 AM


All times are GMT +1. The time now is 02:22 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"