Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
CL (dnoyeB) Gilbert
 
Posts: n/a
Default Arc Fault Circuit Interruptors

I am planning on putting one of tese in my breaker panel to protect the
wiring in our bedrooms. And secondarily to protect my Son who sooner or
later is going to learn what electricity is, as we all have.

Is there anything special I need to know about wiring the Arc Fault
circuit breaker into my service panel?


--
Respectfully,


CL Gilbert

  #2   Report Post  
Bud
 
Posts: n/a
Default

CL (dnoyeB) Gilbert wrote:

I am planning on putting one of tese in my breaker panel to protect the
wiring in our bedrooms. And secondarily to protect my Son who sooner or
later is going to learn what electricity is, as we all have.

Is there anything special I need to know about wiring the Arc Fault
circuit breaker into my service panel?


Can't have a common neutral. Similar to a GFCI breaker in installation.

Arc faults can be series - like a loose connection that is arcing or
parallel - from line-to-line - like an arc between frayed wires. The
original breakers only detected one - I think parallel but not sure.
They are required to protect for both kinds at a near date. I would
suggest waiting to get the kind that protect for both kinds (may be out
now).

They trip on ground faults of 30 mA - to protect equipment/fire not
people. I am not aware of any that trip at 5 mA like a GFCI but that
could have been included. Using a GFCI outlet in addition (or instead
of) may protect your kid more.

Bud--

  #3   Report Post  
 
Posts: n/a
Default

Probably easy enough to wire in, but if it's anything like a GFCI
breaker, it takes up more room in the breaker box.

  #4   Report Post  
Pop
 
Posts: n/a
Default


"CL (dnoyeB) Gilbert" wrote in
message ...
I am planning on putting one of tese in my breaker
panel to protect the wiring in our bedrooms. And
secondarily to protect my Son who sooner or later is
going to learn what electricity is, as we all have.

Is there anything special I need to know about wiring
the Arc Fault circuit breaker into my service panel?


--
Respectfully,


CL Gilbert


Jeez, I hate "guessers"! Here's the straight skinny:
http://www.ul.com/regulators/afci/index.cfm

Try google; lots of hits.

HTH,
Pop


  #5   Report Post  
G Henslee
 
Posts: n/a
Default

Poop wrote:



Jeez, I hate "guessers"!



Nobody cares what you hate, Poop.


  #6   Report Post  
CL (dnoyeB) Gilbert
 
Posts: n/a
Default

CL (dnoyeB) Gilbert wrote:
I am planning on putting one of tese in my breaker panel to protect the
wiring in our bedrooms. And secondarily to protect my Son who sooner or
later is going to learn what electricity is, as we all have.

Is there anything special I need to know about wiring the Arc Fault
circuit breaker into my service panel?



Thanks for all the replies.

--
Respectfully,


CL Gilbert
  #7   Report Post  
 
Posts: n/a
Default

Greetings,

A human life is worth a certain number of dollars but it is not always
the same amount. For instance, I have heard that a car driver's life
in congested traffic is worth an estimated $750,000. By spending an
extra $750,000 on our road system to prevent congestion we could save
one life. We spend significantly more than this on each life we save
in aviation. We would spend even more to save an astronaut's life. If
you had money tagged for safety and spent it on say, making the space
shuttle safer, instead of traffic congestion you would be "killing
people." That is to say that more people would die in congestion
because the money was spent on space shuttle safety than if you had
just shot all the astronauts in the back of the head and built some
wider roads. You will probably find the same kind of scenario is true
with ARC fault breakers. The same money would do a lot more "life
saving good" spent elsewhere. Please consider this in your decision.

Hope this helps,
William

PS: Maybe you just want to install an ARC fault breaker and if so go
for it. It certainly won't hurt anything if properly installed and
they are safer.

  #8   Report Post  
Art
 
Posts: n/a
Default

If I lived in a 50 year old house I would certainly put them in after
replacing a light fixture at my father's old house. Fortuantely we moved
him to a new place. The old wiring had crumbling insulation.


" wrote in message
oups.com...
Greetings,

A human life is worth a certain number of dollars but it is not always
the same amount. For instance, I have heard that a car driver's life
in congested traffic is worth an estimated $750,000. By spending an
extra $750,000 on our road system to prevent congestion we could save
one life. We spend significantly more than this on each life we save
in aviation. We would spend even more to save an astronaut's life. If
you had money tagged for safety and spent it on say, making the space
shuttle safer, instead of traffic congestion you would be "killing
people." That is to say that more people would die in congestion
because the money was spent on space shuttle safety than if you had
just shot all the astronauts in the back of the head and built some
wider roads. You will probably find the same kind of scenario is true
with ARC fault breakers. The same money would do a lot more "life
saving good" spent elsewhere. Please consider this in your decision.

Hope this helps,
William

PS: Maybe you just want to install an ARC fault breaker and if so go
for it. It certainly won't hurt anything if properly installed and
they are safer.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
circuit breaker question! barry martin Home Repair 0 May 2nd 04 08:12 PM
2-pole GFCI breaker for Edison (shared neutral) circuit _firstname_@lr_dot_los-gatos_dot_ca.us Home Ownership 2 March 30th 04 02:30 PM
Typical domestic electrical circuits John Aston UK diy 21 January 21st 04 03:10 PM
Maytag Touchpad and Electronic Control Circuit Board Assembly Patrick Riley Home Repair 4 November 27th 03 02:34 AM
Simple circuit to hold relay on after input falls John Electronics 11 November 1st 03 02:44 PM


All times are GMT +1. The time now is 09:15 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"