Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
 
Posts: n/a
Default Advice on showers?

I've just moved to a new rental property. There's a bath with separate
hot and cold taps, but no shower. Being a shower person myself, I
really need to get a shower installed, but can't afford to shell out a
lot of money (especially when I'm helping the landlord out by improving
*his8 house!) for a fancy shower. I was wondering if there is some way
to adapt the taps in the bath to run a shower from them without having
to replace them with mixer taps?

Another forseeable problem is that there may not be enough pressure to
run a shower from the taps. I don't know how any of it works, but I
read something online that said that the loft tank needs to be suitably
high up in order to get good pressure.

I guess my only other option would be to get an electric shower and
then take it out when I leave, don't particularly wanna have the
plumbing/electricial work done for that though, as again, I'm paying to
improve someone else's house, I'm too broke and too stingy to do that
unless I HAVE to :-P Also, when my Mum had an electric shower
installed, she also had to have a brand new fuse box as her present one
at the time didn't have enough space on to run anything else. The whole
electric shower process cost her the best part of =A31,000 thanks to the
new fuse box!

Can anyone give me some helpful advice on any of this? Would really
appreciate it!

Thanks in advance!
Naomi

  #2   Report Post  
ConcreteFinishing&StuccoGuy
 
Posts: n/a
Default

Only use golden showers. Its the law.

--


Remove the obvious to reply. Experienced and reliable
Concrete Finishing and Synthetic Stucco application in the GTA.
wrote in message
ups.com...
I've just moved to a new rental property. There's a bath with separate
hot and cold taps, but no shower. Being a shower person myself, I
really need to get a shower installed, but can't afford to shell out a
lot of money (especially when I'm helping the landlord out by improving
*his8 house!) for a fancy shower. I was wondering if there is some way
to adapt the taps in the bath to run a shower from them without having
to replace them with mixer taps?

Another forseeable problem is that there may not be enough pressure to
run a shower from the taps. I don't know how any of it works, but I
read something online that said that the loft tank needs to be suitably
high up in order to get good pressure.

I guess my only other option would be to get an electric shower and
then take it out when I leave, don't particularly wanna have the
plumbing/electricial work done for that though, as again, I'm paying to
improve someone else's house, I'm too broke and too stingy to do that
unless I HAVE to :-P Also, when my Mum had an electric shower
installed, she also had to have a brand new fuse box as her present one
at the time didn't have enough space on to run anything else. The whole
electric shower process cost her the best part of £1,000 thanks to the
new fuse box!

Can anyone give me some helpful advice on any of this? Would really
appreciate it!

Thanks in advance!
Naomi



  #3   Report Post  
HotRod
 
Posts: n/a
Default

See if you can unscrew the tub spout and then just add one of those hand
held shower handles etc. You should just be able to add something to where
the water comes out already mixed. Off course this wouldn't help fill the
tub for a bath very well.


  #5   Report Post  
 
Posts: n/a
Default

"Tub spout"? Sorry, I have no clue what that is!

Thanks,
Naomi



  #7   Report Post  
Olaf
 
Posts: n/a
Default

They sell a tub spout with a fixture already attached to screw in a shower
hose. You just have to mount a bracket to hold the shower head overhead and
viola... a shower.

It works like a regular tub spout and even has a knob to pull to get the
shower to come on.



  #8   Report Post  
Duncantuna
 
Posts: n/a
Default

Try something like this Add-A-Shower Diverter .. page down a bit, there are
many varieties from complex to simple.

http://www.plumbingsupply.com/add_a_showers.html

You should be able to unscrew the tub spout, and replace it with another
spout with a spray hook-up. Then buy a simple hand shower, and connect it
to the new tub spout. Total cost, $75.


wrote in message
ups.com...
I've just moved to a new rental property. There's a bath with separate
hot and cold taps, but no shower. Being a shower person myself, I
really need to get a shower installed, but can't afford to shell out a
lot of money (especially when I'm helping the landlord out by improving
*his8 house!) for a fancy shower. I was wondering if there is some way
to adapt the taps in the bath to run a shower from them without having
to replace them with mixer taps?

Another forseeable problem is that there may not be enough pressure to
run a shower from the taps. I don't know how any of it works, but I
read something online that said that the loft tank needs to be suitably
high up in order to get good pressure.

I guess my only other option would be to get an electric shower and
then take it out when I leave, don't particularly wanna have the
plumbing/electricial work done for that though, as again, I'm paying to
improve someone else's house, I'm too broke and too stingy to do that
unless I HAVE to :-P Also, when my Mum had an electric shower
installed, she also had to have a brand new fuse box as her present one
at the time didn't have enough space on to run anything else. The whole
electric shower process cost her the best part of £1,000 thanks to the
new fuse box!

Can anyone give me some helpful advice on any of this? Would really
appreciate it!

Thanks in advance!
Naomi


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I get 2 showers to work at same time off one combi boiler? Ellen Rawlinson UK diy 57 April 11th 05 10:11 AM
Cutback on plywood and new vinyl tile, need advice. statepenn99 Home Repair 1 March 12th 05 05:56 PM
electric cold-feed showers. [email protected] UK diy 13 January 29th 05 06:48 PM
Taking down a timber frame - need advice L Bargstedt Woodworking 6 August 12th 03 08:07 AM
MinWax Wipe-On Poly advice BeerBoy Woodworking 6 July 24th 03 01:19 PM


All times are GMT +1. The time now is 05:59 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"